Posts: 99
Threads: 0
Joined: Jul 2021
Make this Heirloom Writing Desk
This is one of those projects that can be handed down through the generations in your family. While referred to as a Writing Desk, it obviously can be used with a laptop, tablet, etc. Plenty of places and space to organize all your important information. Put your craftsmanship to the test and create this desk for one of your loved ones.
Detailed drawings are available.
Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine. Supporting documentation for this video can be found on the companion website. This link will take you to that resource page…
https://makingstuffwithchrisdehut.com/woodworking-files
Cheers!
Chris DeHut
Posts: 99
Threads: 0
Joined: Jul 2021
Large Scale Scroll Saw Techniques
Learn some new Scroll Saw techniques from a guest presenter, Joe Garza. Joe specialized in large scale scroll sawing and has developed some techniques that make it manageable and is sharing those techniques in this video. Take a few moments to see what is possible!
Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Please visit the companion website for more information about these videos…
https://makingstuffwithchrisdehut.com/
Cheers!
Chris DeHut
Posts: 99
Threads: 0
Joined: Jul 2021
Make this Small Dado Jig for Your Router
Make this handy little dado jig for your shop. This jig uses a small, trim sized router which makes dado machining much more manageable on smaller parts.
Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you! Resurrected from the Woodworking At Home Magazine.
Supporting documentation for this video can be found on the companion website. This link will take you to that resource page…
https://makingstuffwithchrisdehut.com/woodworking-files
Cheers!
Chris DeHut
Posts: 99
Threads: 0
Joined: Jul 2021
Try Your Hand at Chatter Work on the Wood Lathe
Have you ever wanted to create a special and unique finish on your turned parts to make it stand out from the crowd? Take a look at this technique presented by Dick Sing. This technique, called chatter turning, uses what normally would be a bad problem (chatter) and turns it into a very attractive accent on turned parts.
Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
lease visit the companion website for more information about these videos…
ttps://makingstuffwithchrisdehut.com/
Cheers!
Chris DeHut
Posts: 99
Threads: 0
Joined: Jul 2021
Make this Timeless Mantel Clock for your Home
In this video, Chris DeHut walks you through the process of making this timeless and elegant mantel clock. Options in the design include a mechanical clock work, electric clock work, light-on-dark wood, and a dark-on-light wood versions. There are a lot of techniques shown regarding small scale joinery which can be utilized in many other small scale projects.
Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Supporting documentation for this video can be found on the companion website. This link will take you to that resource page…
https://makingstuffwithchrisdehut.com/woodworking-files
Cheers!
Chris
Posts: 99
Threads: 0
Joined: Jul 2021
Relief Carving an Iris Plant Finish Modeling
In this video, David Reilly takes you through the finish modeling step of the Iris carving project. In an upcoming video, I used the techniques David presented here to make my own version of this carving for a pair of cabinet doors. The techniques presented will get you up and carving faster than you ever thought possible!
Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Supporting documentation for this video can be found on the companion website. This link will take you to that resource page…
https://makingstuffwithchrisdehut.com/woodworking-files
Cheers!
Chris DeHut
Posts: 99
Threads: 0
Joined: Jul 2021
About 17 years of evolution and this DIY CNC Router is almost perfect. Join me on this walk around where I explain why I changed from MACH 3 to Centroid Acorn for the controller. What changes I made on the machine over the years to make it much more flexible for the various applications I have for the router. See a one of a kind, automatic tool change system that uses a common 2.2kw collet type spindle. There is plenty to see and hopefully some good ideas can be had along the way.
Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Please visit the companion website for more information about these videos… https://makingstuffwithchrisdehut.com/
[font="helvetica neue", Helvetica, Roboto, Oxygen, Ubuntu, Cantarell, "fira sans", "droid sans", sans-serif]Cheers![/font]
[font="helvetica neue", Helvetica, Roboto, Oxygen, Ubuntu, Cantarell, "fira sans", "droid sans", sans-serif]Chris DeHut[/font]
Posts: 99
Threads: 0
Joined: Jul 2021
Make a Revolving Bookcase for Your Home
Sometimes you have a spot in your house that is too small for anything. Here is a possible solution for that unused space. This tall and narrow bookcase is double sided and revolves on a large Lazy Susan and is secured to the ceiling for stability. Fun project, lots of style flexibility, years of enjoyment.
Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Supporting documentation for this video can be found on the companion website. This link will take you to that resource page…
https://makingstuffwithchrisdehut.com/woodworking-files
Cheers!
Chris DeHut
Posts: 99
Threads: 0
Joined: Jul 2021
Heavy Duty Outfeed Table Workbench Part 1 of 2
One of the most useful and used shop projects I have built in my shop is this outfeed table. Even after 15 + years, this is still in constant use in my shop. Initially it was designed as just a large outfeed table. To this day, it is constantly used also as a workbench, an assembly bench, a finishing bench, and of course and outfeed table. This is one of those projects that can MAXIMIZE the space in your shop.
Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Supporting documentation for this video can be found on the companion website. This link will take you to that resource page…
https://makingstuffwithchrisdehut.com/woodworking-files
Cheers!
Chris DeHut
Posts: 99
Threads: 0
Joined: Jul 2021
09-24-2022, 05:44 AM
(This post was last modified: 09-24-2022, 05:45 AM by Chris from WAHM.)
PART 2 of 2
One of the most useful and used shop projects I have built in my shop is this outfeed table. Even after 15 + years, this is still in constant use in my shop. Initially it was designed as just a large outfeed table. To this day, it is constantly used also as a workbench, an assembly bench, a finishing bench, and of course and outfeed table. This is one of those projects that can MAXIMIZE the space in your shop.
Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Supporting documentation for this video can be found on the companion website. This link will take you to that resource page… https://makingstuffwithchrisdehut.com/woodworking-files
Cheers!
Chris
|
