Posts: 769
Threads: 0
Joined: Jan 2007
Location: ATL
(10-21-2022, 08:24 AM)mound Wrote: what was the adjustment mechanism?
you'd rotate the outside cam which increased / decreased the the angle of the blade.
Posts: 6,442
Threads: 0
Joined: Feb 2006
(10-22-2022, 09:29 AM)Cabinet Monkey Wrote: you'd rotate the outside cam which increased / decreased the the angle of the blade.
Does there exist a more modern stacked dado set (multiple blades and chippers) that has some sort of "rotate to tweak" mechanism so you can fine tune a dado without having to remove the arbor nut & outer blade to mess with spacers?
Posts: 12,605
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
Check the Freud SD608 set, I think it's what you're asking about.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 8,395
Threads: 1
Joined: Mar 2000
SD608 also cuts a flat bottom, not arced like the old wobble blade.
Ray
(formerly "WxMan")
Posts: 24,331
Threads: 0
Joined: Feb 2002
Location: Elizabethtown, KY
(10-19-2022, 02:53 PM)ajkoontz Wrote: I started with a wobble blade and will never go back.
Amen, and Amen.
Dern thing scared me!
"Truth is a highway leading to freedom" --Kris Kristofferson
Wild Turkey
We may see the writing on the wall, but all we do is criticize the handwriting.
(joined 10/1999)
Posts: 6,442
Threads: 0
Joined: Feb 2006
(10-23-2022, 09:53 AM)fredhargis Wrote: Check the Freud SD608 set, I think it's what you're asking about.
Nice! I didn't realize this existed.. Have you used one?
Posts: 12,605
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
(10-26-2022, 07:34 AM)mound Wrote: Nice! I didn't realize this existed.. Have you used one?
I have not, I've had to Freud SD508 since before the 608 was ointroduced. That said, I've read nothing but good things about the 608...it does cut flat bottoms; I think that's because the wobble function is very small...it's only to tweak the width of the cut. Also, if your saw is a Sawstop, I'm not sure (it's a guess) you can use it.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 3,120
Threads: 0
Joined: Oct 2007
Location: Cumming, GA.
I think I still have one of the old Sears wobble blades that I used when I first got into woodworking in the late 80's. Served my limited talents well enough back then but not now. I've never used the Freud but thought it was a good idea. Adjusting with shims can take a few tries.
