Posts: 276
Threads: 0
Joined: Jan 2010
(02-16-2023, 05:11 PM)Stwood_ Wrote: Same here. 200' well with 20' of steel casing.
Check valve screwed directly on the bottom of the pump. No screen.
Sure don't need a screen plugging up that far down.
Thanks to both posters for the feedback. I was starting to get worried.
Mark
Mark in Sugar Land, TX
Posts: 22,746
Threads: 0
Joined: Feb 2005
Location: Regina Saskatchewan Canada
I’ve heard of that practice. Not useable in my part of the world I can see the logic where viable. Doesn’t change the situation with the well.
Blackhat
Bad experiences come from poor decisions. So do good stories.
Posts: 64,847
Threads: 3
Joined: Feb 2007
Location: Merryland
My well is a little over 300ft. Casing is probably 20ft.
