What do yall think about that Rip-it?
#21
I installed a digital read out o my fence several years ago. After using it I would not go back to a tape measure or mounter scale.
Treat others as you want to be treated.

“You only live once, but if you do it right, once is enough.” — Mae West.
24- year cancer survivor
Reply
#22
If I was going to spend a bunch of money on a new table saw fence, I'd give the new Harvey fence a good look.
Reality is that which, when you stop believing in it, doesn't go away. - Philip K. Dick

Mark

Reply
#23
(08-16-2023, 11:44 AM)lift mechanic Wrote: I installed a digital read out o my fence several years ago. After using it I would not go back to a tape measure or mounter scale.

I just bought a Wixey and it arrived today.  I am thinking of making a complete switch and going to metric at the same time.  Easier math
Reply
#24
For the digital readout, how do you deal with taking the fence off the saw?
Reply
#25
Not sure about the Wixey, but the one I have the fence is just lifts straight up and off. The read out stays on the slide and below the cast iron top. 2 pins locate the fence to the read out.
Treat others as you want to be treated.

“You only live once, but if you do it right, once is enough.” — Mae West.
24- year cancer survivor
Reply
#26
Lift mechanic

What brand is yours?
Reply
#27
My digital read out is a SHAN BC50 Digital Scale. It fits my 50" Biesemeyer fence. I have had it on my Unisaw for about 12 years. The one I had on my planer stopped working so I replaced it with a Wixey, but it is not removable. I tried to do a search for the Shan, no luck.
Treat others as you want to be treated.

“You only live once, but if you do it right, once is enough.” — Mae West.
24- year cancer survivor
Reply
#28
JDuke,  lifting the fence off the saw was pretty important to me, that is why I went with Wixey, looked easier than the igag.  On the wixey,  the readout slides on the rail, and a magnet holds it to the fence. Just push the readout away and lift the fence, the readout does not need to be reset .
Reply
#29
Thanks, I’ll look at the wixey
Reply
#30
I have had a Wixey on my Sawstop for about 4 years now, and I'd never go back. So much less anxiety about having to go back to a specific measurement later in a project.
Math is tough. Let's go shopping!
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.