Posts: 334
Threads: 0
Joined: Nov 2019
11-07-2023, 07:09 PM
Just this weekend I picked up a drill press with a custom table at an estate sale. After getting the set home I found that an errant fence, I assume for a table saw, had hitched a ride as well. Since the sale's over (and the table saw long gone), I cannot return the fence. So, if y'all can help identify this fence, I'd like to put it down in S&S for shipping cost to anyone who could use it.
There are no logos or other identifying marks, beyond that one sticker about removing when crosscutting and the hardware itself.
Greg
Posts: 367
Threads: 0
Joined: Jun 2006
Location: Hi "Mojave" Desert
My WAG:
Bandsaw resaw fence?
When you don’t get what you want, you get experience!
Posts: 334
Threads: 0
Joined: Nov 2019
(11-09-2023, 01:02 PM)Dave Crow Wrote: My WAG:
Bandsaw resaw fence?
You may well be right--there was a small band saw in that basement, as well!
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
Definitely not a table saw fence. That cutout in the center makes me think router table fence.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 367
Threads: 0
Joined: Jun 2006
Location: Hi "Mojave" Desert
(12-07-2023, 02:10 AM)Stwood_ Wrote: Definitely not a table saw fence. That cutout in the center makes me think router table fence.
Yep, I agree router table
jointer fence. Would function similar to this one:
https://www.routerworkshop.com/jointer101102.html
When you don’t get what you want, you get experience!
Posts: 363
Threads: 0
Joined: Jun 2013
Location: NW Indiana
That cutout sure looked like router table (or drill press) fence to me--but the sticker that says to remove before cross cutting made that dubious in my mind. If, on the other hand, the table saw fence was slotted, it COULD be a low rip fence attachment for a standard rip fence--kind of an add-on version for a high-low fence. Just spit-ballin' though.
earl
Posts: 24
Threads: 0
Joined: Jul 2007
12-08-2023, 10:13 AM
(This post was last modified: 12-08-2023, 10:25 AM by Cuprousworks.)
That's from a Hirsh brand table saw conversion kit, which used a circular saw attached to the bottom of the table for a worksite table saw. I believe it also allowed for similar conversion to a router table, for which you reverse the fence and use the circular cutout.
Posts: 334
Threads: 0
Joined: Nov 2019
(12-08-2023, 10:13 AM)Cuprousworks Wrote: That's from a Hirsh brand table saw conversion kit, which used a circular saw attached to the bottom of the table for a worksite table saw. I believe it also allowed for similar conversion to a router table, for which you reverse the fence and use the circular cutout.
Great call, that's a match! Based on your ID, a search brings up plenty of matches. Here's one:
https://s3-us-west-2.amazonaws.com/usedp...72_934.jpg
Sorry to anyone who might now want to grab this fence, but last week I gave up and donated it to our local ReStore.
Thanks so much to everyone who has helped figure this out. I appreciate it!
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
Good deal............
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
