09-17-2024, 08:15 PM
Gently used Format 4 Kappa 40 run only in a home shop environment.
10 HP 3 Phase motor with a 10 foot sliding table.
Electronics upgraded by Felder in 2018 including screen, controller, main board and voltage regulator.
Plugged in and available for demonstration in Punta Gorda FL.
$15,900.
Specifics from Felder invoice:
Circular Saw Kappa 40, 90-45 degree Sawblade 250-400mm, Max cutting height 133mm, electrical height adjustment
Flange set for Dados
X-motion Touch screen control 10.4”/264mm color display with touch function in the control panel at eye height, with A4 list holder for pieces; positioning control for height, angle and parallel cut; tool database for saw blades; cutting programs; grooves, row of grooves, rabbets and miter; USB interface and preparation for network connection; tiltable panel.
Electronic Display adjustment – inch.
Scoring unit with motor 3 X 230V, 1.1 kw 50/60 Hz for scoring blade D=120mm
Electrical height adjustment of scoring unit with automatic height setting on/offSpeed display for 3 speeds
Overhead saw guard for cutting width up to 1250mm, cover for 90 degree and for angle cuts adjustable in height, max. sawblade diameter 400 mm, cutting height 133 mm.
Sliding table, table length 3200 mm
Electrical switch station with scoring unit on sliding table
Miter index scale with length compensation
Position controlled motor driven rip fence Kappa 40 X-motion with digital display and cutting width 1250 mm
Electrical system 3X230V, 60 Hz, 7.35kW, soft start, 3 speeds, CE with brake
Operating manual included
Air clamp hoses, fittings and regulator included. Air clamps not included.
Blade change wrench included.
10 HP 3 Phase motor with a 10 foot sliding table.
Electronics upgraded by Felder in 2018 including screen, controller, main board and voltage regulator.
Plugged in and available for demonstration in Punta Gorda FL.
$15,900.
Specifics from Felder invoice:
Circular Saw Kappa 40, 90-45 degree Sawblade 250-400mm, Max cutting height 133mm, electrical height adjustment
Flange set for Dados
X-motion Touch screen control 10.4”/264mm color display with touch function in the control panel at eye height, with A4 list holder for pieces; positioning control for height, angle and parallel cut; tool database for saw blades; cutting programs; grooves, row of grooves, rabbets and miter; USB interface and preparation for network connection; tiltable panel.
Electronic Display adjustment – inch.
Scoring unit with motor 3 X 230V, 1.1 kw 50/60 Hz for scoring blade D=120mm
Electrical height adjustment of scoring unit with automatic height setting on/offSpeed display for 3 speeds
Overhead saw guard for cutting width up to 1250mm, cover for 90 degree and for angle cuts adjustable in height, max. sawblade diameter 400 mm, cutting height 133 mm.
Sliding table, table length 3200 mm
Electrical switch station with scoring unit on sliding table
Miter index scale with length compensation
Position controlled motor driven rip fence Kappa 40 X-motion with digital display and cutting width 1250 mm
Electrical system 3X230V, 60 Hz, 7.35kW, soft start, 3 speeds, CE with brake
Operating manual included
Air clamp hoses, fittings and regulator included. Air clamps not included.
Blade change wrench included.