Posts: 40
Threads: 0
Joined: Jul 2016
Hi there. I'm in need of a miniature router plane, and was wondering which to get. The Veritas looks good pricewise. Any recommendations out there?
Tim
Posts: 286
Threads: 0
Joined: Apr 2007
The Lie Nielsen one is awesome. The square shaft prevents lateral movement of the blade.
Posts: 9,534
Threads: 0
Joined: Jan 2005
Location: Orlando FL
I have the larger Veritas that works pretty good. I would imagine the smaller would be good too. You could also make your own if you are so inclined. For a small router it should be pretty straight forward.
Posts: 1,563
Threads: 0
Joined: Feb 2003
I have the Veritas one and am happy with it. I used it to clean up dados I cut in cabinet sides to accept metal shelf brackets. Well, the plywood was bowed so grooves were not deep enough in some spots. Since the cabinet was already installed, the back and face frame prevented me from using a full size router plane. Anyway, this is the only actual project use this plane has gotten but it was good enough to get the job done and worked perfectly in this scenario.
Posts: 2,719
Threads: 0
Joined: Dec 2005
I have the Lie Nielsen and what else can I say: its a Lie Nielsen.
Posts: 40
Threads: 0
Joined: Jul 2016
(11-13-2024, 03:29 PM)Philip1231 Wrote: I have the Lie Nielsen and what else can I say: its a Lie Nielsen.
Thanks for the replies gents. I ordered the Veritas one. As Phillip 1231 says, its a Lie Nielsen. Would love to have that one, but twice the price of the Veritas. Someday maybe........
