Transformations
#27
I had meant to mention the way I dealt with the dowels, the leg joinery, but there was not the opportunity.

Here are the legs, and you can see the ugly dowels. What I did was to turn them upside down, and remove the dowelled section in the taper cut ...

[Image: legs2.jpg]

First, the legs were morticed ..

[Image: legs16.jpg]

I built a simple fixture for my sliding table saw ...

[Image: legs8.jpg]

The nail holes were filled with coloured epoxy, which disappeared after the finish was applied ...

[Image: legs12.jpg]

And then smoothed ...

[Image: legs13.jpg]

I was asked (when I posted this photo elsewhere) why I planed into the grain. The answer is ‘because I can with a closed chipbreaker’
Smile No, the real answer is because it was easier to keep track of the mark demarcating the flat section.

Regards from Perth

Derek
Articles on furniture building, shop made tools and tool reviews at www.inthewoodshop.com
Reply
#28
Very clever design and execution on the drawer, Derek! And exceptional work as usual - well done!

Doug

P.S. Did I see "metal" angle braces in the corners? - pure heresy!!! (Just kidding
Smile)
Reply
#29
(07-03-2020, 10:57 PM)Derek Cohen Wrote: Mike ...

Height: 29"
Top: 36" wide, 13 3/4" deep at centre and 12" deep at ends
Apron + legs: 31"
Apron: 27 1/2"

Regards from Perth

Derek

Thanks!
Reply
#30
Rita's table at home ...

[Image: Ritas-table1.jpg]

Regards from Perth

Derek
Articles on furniture building, shop made tools and tool reviews at www.inthewoodshop.com
Reply
#31
Looks like it was made for it.  
Wink  So---was she pleased?
Reply
#32

Smile

Regards from Perth

Derek
Articles on furniture building, shop made tools and tool reviews at www.inthewoodshop.com
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.