Posts: 10,279
Threads: 1
Joined: Nov 2001
Location: Prince Frederick, MD
I'm thinking along the lines that you are.
Put dados in the runners/supports that run the length of the bed. Drill them for lag bolts. Put perpendicular runners (for supporting your drawers) across, seated in the dadoes, and screw them into place. You'll still be able to take it apart.
Through nuts and bolts might be a better choice if it'll be taken down regularly.
Semper fi,
Brad
Posts: 2,721
Threads: 0
Joined: Feb 2002
You could build the drawer super-structure as a complete unit that connects to the rails in the same way the rails connect to the head/foot boards:
Courtesy of Woodcraft:
It wouldn't be inexpensive, but also wouldn't come apart.
~Dan.
Posts: 17,152
Threads: 0
Joined: Aug 2006
In that particular bed the box spring sits in between the rails. There is no place for drawers. You could elminiate the box spring and place the mattress on a platform. If you do that then the platform will need support and that support structure can also support drawers. If you keep the box spring then you have two choices. Widen the rails and you make the bed very high. Or place the drawers under the box spring, in which case the drawer box can rest on the floor.
There are two kinds of people: Those who can extrapolate from incomplete data.
It is far better to grasp the universe as it really is than to persist in delusion, however satisfying and reassuring - Carl Sagan
Posts: 680
Threads: 0
Joined: Nov 2009
Here is how I did mine with mortise and tenon between the bed rails and the foot and head board.
Here is a test assembly of the bed before I assembled the box for the drawers which also supports the mattress.
Here are the mortises in the head board
and in the foot board to receive the bed rails.
And the completed bed.
"...cuttin' your presidency off right now. Just quit. Because if this is you helpin' us, then stop helpin' us."
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
Seems to be the one step Alan doesn't show in his pics, and in your pic there is what appears to be an absence of "center legs" I'm thinking there is a solid rail running from headboard to footboard where the back side of the drawer boxes hang supported. I think if there were any type of a load your thought about center legs would allow for much better support though. In the pic you post if they are there, they have airbrushed them out of the pic. But then I'm not real clear if there are drawers in the pic you've posted. If yours is a regular bed, and doesn't yet have drawers, you may want to make sure Mom knows that the box springs are going to be some higher than that pic shows them.
Worst thing they can do is cook ya and eat ya
GW
Posts: 22,408
Threads: 0
Joined: Dec 2004
Location: Monrovia, AL
Thanks everyone, you've given me some good ideas. Nice bed Alan
To be clear, LOML wants me to build this bed to look like the pic above but with drawers. The bed will be a platform bed with no box springs. I'm planning to use 3/4" plywood for the mattress sitting on a ledge down each rail and the drawer boxes. I'll plan on legs for the back of the boxes.
Steve
Posts: 10,004
Threads: 1
Joined: Apr 2005
Location: Texas
Bump
...Naval Aviators, that had balz made of brass and the size of bowling balls, getting shot off the deck at night, in heavy seas, hoping that when they leave the deck that the ship is pointed towards the sky and not the water.
AD1 T. O. Cronkhite
Posts: 158
Threads: 0
Joined: Feb 2012
What size bed are you making? A very good friend of mine is a manager at Mattress Warehouse. He told me all beds they sell have a bed frame center support rail. On a full size bed, the center support will have one foot and on a queen or king, there will be two feet on the center rail. Twin beds do not have a bed frame center rail support. He also says that the center support is an absolute must to keep the mattress warranty in tact. He explained that most mattresses fail due to lack of support and this voids the warranty. According to him, mattresses are heavier than years past and the weight may eventually stress the frame if it doesn't have the center support. In addition, if a customer wants to use the mattress warranty, the mattress manufacture will send a representative out to see the bed and mattress. If there is no center rail with a foot or feet, the warranty is void, no questions asked, it's that simple. So if the bed is going to be larger than a twin, I strongly recommend that you install a center foot. Regardless if you can make it without it. And if it's a customer you're making it for, you don't want them coming back on you because you neglected to build it according to mattress manufacture specifications. Just sayin.
