▼
Posts: 10,717
Threads: 1
Joined: Jan 2006
Location: Orlando, Florida
Wenge sides and top. Molding is cocobolo. Curly maple drawer fronts with turned desert ironwood knobs. Each drawer has a specific purpose with dividers and felt bottoms. The top drawer also has a ring holder. Not the greatest pic in the world. This project kicked my tail! I made mistakes at nearly every step along the way. In the end, it turned out nicely enough. It's for my fiancé. She's happy, so that means I am too. 
Still Learning,
Allan Hill
▼
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
Happy spouse, happy house, still applies to students, not yet graduated. Love the box, the Wenge and CM are awesome together, for my $ the cocobolo falls short. I think overall I would like it more with just the 2 base woods, but it is a nice box, no question of that. What was the inspiration? Has elements of Shaker to Contemporary, possibly Asian. Tell all, build details, hand power tool %, you know the rules. 
Worst thing they can do is cook ya and eat ya 
GW
▼
Posts: 11,703
Threads: 1
Joined: May 2014
Location: South Central Oklahoma
I like it.  My signature line used to read: It's only a mistake when you can't fix it...  Someone once told me it's only a mistake if you don't LEARN from it... I keep learning with every project I do... a lot. Great job.
Jim in Okie
You can tell a lot about the character of a man -
By the way he treats those who can do nothing for him.
Posts: 10,717
Threads: 1
Joined: Jan 2006
Location: Orlando, Florida
Inspriation was a box in the book 400 Wood Boxes. I was going to use wenge for the molding, but it's just too brittle to shape nicely. The molding is attached with glue and 23 ga pins. The pic doesn't do the cocobolo justice. There is more visual interest in the coco close-up. I mostly used power tools on this project. Sides were joined to a pine base with loose tenons. I applied a face of wenge to the pine base to complete the "frame" of the front of the box. The back of the box is 1/4" BB pinned into a dado. The back is not intended to be seen. The maple drawer fronts are 1/4" veneer glued to maple boxes. I used maple drawer runners set into grooves in the interior of the sides, which guide into a groove in each drawer. The compartments in the drawers are poplar. I used adhesively backed felt to line the bottom two drawers. The top drawer has a ring holder (Rockler) and the back half of the drawer has a leather lining. The knobs I turned myself on the lathe. My sweetie didn't want ebony - she wanted small knobs. Finish is General Finishes gloss Arm-R-Seal, topped off with Renaissance wax, buffed out. I used hand tools for fitting everything.
Still Learning,
Allan Hill
▼
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
I like those knobs, but am now confused I had thought them to be Wenge. Very nice turnings. I was almost positive they were lathe turned, and not a knob companies lathe either. The shape, and their slightness looks one of. They explode off of the CM.
This is just the perfect application for some CM in mixed woods for me. Using just a small amount colored naturally, against a darker contrast base. It's either that or the entire piece, and colored, ala Dave Diaman.
Worst thing they can do is cook ya and eat ya
GW
Posts: 1,448
Threads: 0
Joined: Apr 2007
Very elegant look, the coco and curly maple. Love the finish as well.
Bob
"All that I do or say is all that I ever will be"
Billy Joe Shaver, Old Five and Dimers Like Me
Posts: 6,755
Threads: 0
Joined: Aug 2001
Location: Post Falls, ID
Well done, Allen! 
"One should respect public opinion insofar as is necessary to avoid starvation and keep out of prison, but anything that goes beyond this is voluntary submission to an unnecessary tyrany, and is likely to interfere with happiness in all kinds of ways."
Posts: 1,555
Threads: 0
Joined: Dec 2004
Location: Sumner Co, Tn
Well done indeed Allen. If she's happy, you're happy. I'm happy because it looks great!
Joel
USN (Corpsman) 1968-1972
USAF Retired Aug 31, 1994
Santa Rosa County, Fl Retired Jun 1, 2012
Now just a hobbiest enjoying woodworking!
Posts: 6,678
Threads: 1
Joined: Jan 2003
Location: Southern California
Well done! Very
Thanks, Curt
-----------------
"Life can only be understood backwards; but it must be lived forwards."
-- Soren Kierkegaard
Posts: 3,066
Threads: 0
Joined: Jan 2004
Seriously nice Allen. Your finish is so good on the wedge that I would have guessed a less porous species.
It's always chancy to mix that many woods, but I think your combination works beautifully, probably because the clean lines of the design keep it pure. Your photo of the cocobolo does not show it off well, but we all know it is a spectacular wood, and your other woods show very well, so I am guessing it is stunning in person.
|
