Posts: 477
Threads: 0
Joined: Apr 2004
I built one a few years ago and the only changes I made were to add the drop down shelf in the back. It is about 18" wide and the full length of the base. I used a locking hinge at both ends of the shelf. I also added ball rollers so it could be moved around. I'm not sure if the plan called for them or not but I remember I had to make a modification late in the game at my late wife's request. The opening is very narrow so some modification could be in order there. Otherwise it was pretty much to plan. dd
Posts: 12,604
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
I built it many years ago when that issue first came out. The lift is still in perfect working order (much to my surprise). I was always worried that the front face of the cabinet would not be stiff enough to avoid sagging over the years, but that also has not been the case. It's actually still fairly square, even though LOML leaves it open all the time with the sewing machine and serger sitting on their shelves. I think I made mine a little larger (I didn't go back to look at the plan), but the cabinet is 48" wide with a 20" knee hole. That has been adequate for LOML's use. I remember reading some posts back then that some guys had trouble making the feet, but I don't recall that being a particular problem.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 1,762
Threads: 0
Joined: Jan 2008
I haven't built this design but have built others for my wife and can make a couple of suggestions from looking at the photo. First, is the height of the machine correct for your wife; improper height can cause back, neck and shoulder pain. Note the difference in height between the height of the sewing area (technically, this is the sewing table of the machine) of the sewing machine and the serger; one will be comfortable and one won't, most likely. Second, the sewing machine cutout and lift should be further to the right so that the needle is more centered in front of the person sewing; the way the machine is shown, the person would need to twist to the left to get both hands in the sewing area and I believe the drawers would then get in the way, besides just being an awkward position.
Don
Posts: 12,879
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
I set out to build one 10 years ago or so and reviewed the plans with my wife. She decided she didn't want the lift, nor did she want the fold open top and swing out support leg. I ended up making a much simpler cabinet and she's very happy with it. What I'm saying is make sure you build what your wife wants.
John
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
The lifts are really good, and work as you would want them to, at least the ones from 15 or so years back did.
Don't know anything about a plan for a sewing center. I think it best to seat the person to use it in a chair they want to use, and just design it around their seated position, use their reach, knees, and every other angle you can think of, add the drawers they want, and get busy. Seeing one or two at a sewing center should easily resolve any mysteries. All straight lines, and panels, a pretty easy build, once you figure out what your customer wants.
Worst thing they can do is cook ya and eat ya
GW
