Posts: 29,152
Threads: 1
Joined: Aug 2002
rabbet and glue.
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
Posts: 13,485
Threads: 0
Joined: Oct 1999
Typically I simply glue edging on. I may use a few pin nails to hold things in place until the glue dries, saves on clamps.
Alternatively, groove the ply edging and cut a tongue on the edge of the ply. Very strong joint and if you mill carefully, the T&G will keep everything aligned.
Ralph
