Posts: 42,638
Threads: 0
Joined: Feb 2002
I remember a similar situation on Ask This Old House----Roger helped a guy remove a climbing vine that left the little spots all over the siding. I can't remember what they used, though I think they were scraped off.
Dave
Posts: 5,119
Threads: 12
Joined: Apr 2009
Location: SoMar
A pressure washer will take care of it, if it is indeed vinyl siding. If it's aluminum, you might have more problems.
Posts: 1,937
Threads: 0
Joined: Feb 2008
For tough stains I use Comet on a wet sponge, rinsing before it dries, working from top to bottom. For darker colors, where bleach may be a concern, I swap to Ajax without bleach. For general cleaning I use Simple Green/water and lightly "brush" with a soft push broom. A plastic window planter is my "bucket" of choice. Again, work from top down and rinse before it dries.
Sign at N.E. Vocational School Cabinetmaking Shop 1976, "Free knowledge given daily... Bring your own container"
Posts: 403
Threads: 0
Joined: Sep 2003
I should have added in the OP that the "residue" contains some wood fiber. When I scrape off the fiber with my fingernail, a stain remains.
I haven't tried power-washing; my uneducated guess is that it will have little effect. But I'll give it a shot!
Posts: 4,676
Threads: 0
Joined: Jan 2007
Baking soda, water and a sponge. Wet sponge with water and sprinkle the baking soda upon the sponge then wipe away. The alkalinity of the baking soda in its powdered form is a good cleaner that won't scratch or damage the surface of the vinyl siding. Rinse the surface well with fresh water once cleaned.
Any free advice given is worth double price paid.