▼ 
09-19-2015, 02:47 PM
I am looking for a good Brad point drill bit set. They would be used for more carpentry tasks so a set that bits can be replaced would be ideal.
I looked at the rockler set but they seem to get terrible reviews. ▼
09-19-2015, 03:21 PM
Lee Valley. I've had the 28 bit HSS set for over 10 years. They are excellent and they offer all sizes individually for replacement.
Bob
09-19-2015, 04:01 PM
The LV HSS brad points are as good as they (IMHO). I've had this set for quite a while, and they really do perform (as well as last). I have the set of 7, but pick the one you need.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
▼
09-19-2015, 04:18 PM
+1! Have had them for many years. Also great are Forrest City.
Joseph Connors
The new Golden Rule ..... Those with the Gold make the rules! 
09-19-2015, 04:36 PM
Just a thought, but has your drilling actually been varied enough to support a set? I look at these like router bits, set's they want me to have don't match bits I want/need to use. Maybe I'm all wet, but in the really smaller sizes I haven't seen a big difference between high end bits, and the holes they make, and cheap junk bits. 1/4" is a + - size, but starting at 3/8", 1/2", 5/8" and 3/4" I drill enough of them, and can see a definite change between cheap, and good bits. So I just buy individual sized of the ones that benefit me. YMMV.
If it goes over 3/4" I use Forstners, so the bigger bits don't prove useful to me either, again YMMV.
Worst thing they can do is cook ya and eat ya
 GW |
|
Brad point set
|
|
|
|
|
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
