Chattanooga Tennessee area

[GOVOLS]

Anyone know someone in Chattanooga area that can joint some 2x 4 x 6x 8 feet hickory for me ? This was lumber that I had sawed up that came from my yard after tornado came weather a few years ago. I'm building a farmhouse table but my 6 jointer is struggling.

[WoodTinker]

Looks like a good time to learn how to hand plane.

Stanley no7 or no8 would work nicely.

YMMV

[Guest]

Do a search for "millwork" or "millwork manufacturers" in the Chattanooga area. Millwork shops will often dress and dimension small batches of rough lumber for a reasonable charge. I just did a quick Google search and came up with a couple dozen possibilities in your area. A little telephone research should turn up someone who will do this for you.

[dg152]

Well, I'm not quite in the Chattanooga area, but you're more than welcome to bring the wood up to Christiana and put it through my 8" jointer and 15" planer. I wouldn't charge you anything but if you've got some extra hickory we could work something out.

Doug

[sniper]

Bluesmanmatt is in your area and may be able to help, His web page

I'm on the west side of Huntsville if you'd like a road trip down HWY 72, you're welcome to come by. I've got a 12" jointer and 15" planer, both with shelix heads.

[GOVOLS]

Thanks again Sniper.

Great spending an hour at your shop.

You have a great shop.