Posts: 2,036
Threads: 0
Joined: Jan 2003
How about a bump in case someone missed the first.
Thanks
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
toolmiser said:
I recently purchased a like new PC 550 pocket cutter for $40.00. It's missing both fences. E Replacment parts has it discontinued. It looks real simple and I bet I can make one if someone has the dimensions, and or pictures. The part number is 8777948. Much appreciated.
Sold mine some years ago. Yes those fences were simple straps. Seems like about 1/8x1.
I never used mine, always just eyeballed the wood placement.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 383
Threads: 0
Joined: Jun 2005
I'm the guy BloomimgtonMile referred you to on Sawmill Creek.
Here are some photos of the base and guides of my P-C 550:
The guides are just two strips of powder-coated steel, 3/16" thick by 1-1/2" wide by 7-1/2" long. They each have two slots 5/16" wide by 3/4" long, matching the slots in the base. The carriage bolts are 1/4-20 X 1", and the plastic knobs are about 1" in diameter. I think you could use wing nuts and washers if you couldn't find suitable knobs.
Hope this helps!
Rick
Posts: 16,152
Threads: 0
Joined: Dec 2005
I've got one and I'll try to get some pics of it tonight.
Actually I just remembered I sold it. Crud.
