Posts: 8,395
Threads: 1
Joined: Mar 2000
When I bought mine, I got a mobile base and the overarm dust collection. If I had it to do again, might not get the overarm dust collection.
It works OK. Not perfect. But I find that it seems to be in the way almost no matter what. I have a dedicated shop building. IIRC, you're working from a portion of a 3-car garage. I think I'm going to try and rig a dust collection pickup from the ceiling that comes down to the back of the blade guard. When not needed, it would be up above on a retractable holder of some sort.
Ray
(formerly "WxMan")
Posts: 12,606
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
Everything I read said they aren't very good , although those who did better seemed to have a shop vac hooked to them instead of a DC. I put an Excalibur on mine, since I already had it. The OEM has been hanging on the wall since the day it arrived.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 635
Threads: 0
Joined: Jul 2007
Location: Bridgeport, CT USA
I built my own out of PVC and flex hose. There is a lot of sawdust that comes out of the rear port of the blade guard (easy to discover when you forget to hook up the hose), so getting rid of it is a good idea.
I can easily remove the hose and clamp it to the overhead arm (with a plug in the hose to prevent loss of DC efficiency) for times I don't use the blade guard. My riser pipe has a joint at table level so I can remove the whole upper arm when I need the room.
Not too expensive and built the way I wanted it to be.
Posts: 370
Threads: 0
Joined: Feb 2007
When I bought my PCS the overarm dust collector was a freebee. I feel it works well without it the sawdust flies out the back of the guard.
