Woodnet Forums › › Active › Woodworking Power Tools v
Delta Table saw replacing obsolete parts

▼
SheriDi Offline
Member
Posts: 214
Threads: 0
Joined: Jun 2003
#41
04-11-2016, 08:14 PM
Hello all I have a Delta tablesaw that I purchased in 1998. The switch has finally given up the ghost and is no longer available. I find it hard to believe that the whole saw is junk now because of a switch, but I know nothing about these sorts of things. Is it possible that a switch from a newer model will fit mine? Delta is closed now so I'll give them a call tomorrow but just interested in what others have done/experienced.

Thanks,
Sheri
A Veteran is someone who, at one point in their life, wrote a blank check payable to the United States of America for an amount up to and including their life. That is beyond honor.
Find
Reply
▼
cvillewood Offline
Member
Posts: 676
Threads: 2
Joined: Jan 2007
#42
04-11-2016, 09:06 PM
A switch is easy most likely. Look for part numbers on it (take it apart if necessary) and you're sure to find a supplier online. Or you can replace it with a different switch.

Post a picture of it so we can help more. What saw is it?
Find
Reply
▼
WaterlooMarc Offline
Member
Posts: 3,390
Threads: 1
Joined: Jan 2002
#43
04-11-2016, 09:45 PM
Take the switch itself apart. Most often the real "switch" is a pretty universal part. All the plastic parts that make up the toggle or paddle is just eye candy. There are several shown in grizzly' catalog. One of theirs worked to replace the switch on my old jointer. Took the switch apart and replaced the guts and put the plastic switch back on.

My point was that you're more then likely not tied to Delta, thankfully.
-Marc

Find
Reply
▼
SheriDi Offline
Member
Posts: 214
Threads: 0
Joined: Jun 2003
#44
04-11-2016, 10:16 PM
This is the part that I think is bad. It's a magnetic switch (I think).


I checked that company's website and I couldn't find anything similar.
A Veteran is someone who, at one point in their life, wrote a blank check payable to the United States of America for an amount up to and including their life. That is beyond honor.
Find
Reply
▼
MKepke Offline
on a list
Posts: 1,747
Threads: 13
Joined: Jul 2001
#45
04-12-2016, 09:38 AM
SheriDi said:


This is the part that I think is bad. It's a magnetic switch (I think).


I checked that company's website and I couldn't find anything similar.


What model of saw is it? Because the image you posted shows the switch is only rated for 1/2 HP.

Is this a e.g. scrollsaw?

-Mark
If I had a signature, this wouldn't be it.
Find
Reply
▼
SheriDi Offline
Member
Posts: 214
Threads: 0
Joined: Jun 2003
#46
04-12-2016, 10:24 AM
No it definitely is not a scroll saw. It's the original switch from my 3 HP 230V Unisaw.

Well that's interesting. . . . .
A Veteran is someone who, at one point in their life, wrote a blank check payable to the United States of America for an amount up to and including their life. That is beyond honor.
Find
Reply
▼
Axl Offline
Member
Posts: 1,430
Threads: 1
Joined: Jun 2008
#47
04-12-2016, 10:41 AM
A 1/2hp switch on a 3hp motor. Imagine that.
Get a paddle switch and mount it in a convenient place.
Find
Reply
SheriDi Offline
Member
Posts: 214
Threads: 0
Joined: Jun 2003
#48
04-12-2016, 12:15 AM
Looks like Grizzly might just have what I need!

Thanks for the responses.
A Veteran is someone who, at one point in their life, wrote a blank check payable to the United States of America for an amount up to and including their life. That is beyond honor.
Find
Reply
▼
MsNomer Offline
Wood Recycler
Posts: 14,955
Threads: 0
Joined: May 2005
Location: Oklahoma
#49
04-12-2016, 06:59 AM
I'm surprised you made it this long. Switches are Delta's Achilles heel.
Carolyn

Trip Blog for Twelve Countries:   [url=http://www.woodworkingtraveler.wordpress.com[/url]

"It's good to know, but it's better to understand."  Auze Jackson
Website Find
Reply
Mr_Mike Offline
Rocketeer
Posts: 31,164
Threads: 2
Joined: Mar 2003
Location: Athens, TN
#50
04-12-2016, 09:06 AM
SheriDi said:


Looks like Grizzly might just have what I need!

Thanks for the responses.



I'm running a Grizzly switch on my Delta drill press. Took a bit of looking to find a drop-in replacement.

A "Close Enough" solution that required a faceplate modification was super easy to find, but the Grizz just popped right in.
Rocket Science is more fun when you actually have rockets. 

"The Constitution is not an instrument for the government to restrain the people, it is an instrument for the people to restrain the government." -- Patrick Henry
Find
Reply
Thread Modes
Delta Table saw replacing obsolete parts


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.