04-29-2016, 10:49 AM
I took apart a dining room table that was about 80 years old. The extension leafs pull out from under the ends of the top of the table then lift up level with the top. I don't know what this design is called so all I can do is describe it.
The table leafs and tops were salvaged for other projects. I saved the hardware. This includes four latches, four steel pins, four cast iron stops and a pair of brackets that the arms supporting the leafs slide into. Screws for mounting these parts except the brackets are included.
If anyone is interested in this hardware send me a PM otherwise it's off to the landfill.
Thanks, Bill
The table leafs and tops were salvaged for other projects. I saved the hardware. This includes four latches, four steel pins, four cast iron stops and a pair of brackets that the arms supporting the leafs slide into. Screws for mounting these parts except the brackets are included.
If anyone is interested in this hardware send me a PM otherwise it's off to the landfill.
Thanks, Bill