How do you spread glue over a large surface?

[Shovel Man]

The glueup is a bent lamination of 4 plys 30" x 72". The bend is pretty gentle, only 120" radius, but I need good strength in the final piece. Planning on using ordinary yellow glue, which will be plenty strong. Thinking of using a squeegee. What would you use?

[Earl Kelly]

9" black foam roller Allow extra glue to start until the roller gets saturated.

[John Mihich]

+1 on foam roller. That's what I have used for larger pieces. Not perfect but pretty quick.

[Rodneywt1180b]

How do I spread glue on a large surface?
I start by trying to spread glue on a small surface. The rest just happens.
Rodney

[Gary™]

Under a buck. I use them for spreading glue when veneering to help get a uniform coating. Ace Hardware

[Wild Turkey]

+1 on notched trowel. Roller works, but I find the trowel gives better control.

[Rick L]

Small short nap paint roller. Squeegee too uneven

[ruffcutt]

These

http://www.dickblick.com/products/speedb...CFYkIvAodP_EKiQ

[Herb G]

Go with the trowel. You'll thank us later.

[AgGEM]

J roller works too. Washable.
Ag