Posts: 29,152
Threads: 1
Joined: Aug 2002
I am surprised this even made it to a public forum (well two now)
Cannot wait for the responses
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
Posts: 22,325
Threads: 0
Joined: Dec 2005
Location: Oakdale, MN
Its not a shock to me. Electronic parts fail. Heck, circuit breakers fail more than people think.
I worked for a circuit shop for 5+ years in multilayer stuff, really technical, and saw the craziest failures (it was actually my job for a number of years to isolate WHERE the failure was, and to microsection it, and find visual evidence. Literally finding a needle in a haystack stuff). Even military stuff. I always wondered how many cycles the circuity in SS are rated for. I mean off and on for years and years.....they will fail. Its just a matter of time.
Once Favre hangs it up though, it years of cellar dwelling for the Pack. (Geoff 12-18-07)
Posts: 12,604
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
As many as they have in service, I'm surprised this is the first time anyone has had that happen. Electronics can do strange things. It will be interesting to see what happens.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 3,493
Threads: 0
Joined: Jun 2008
Does this happen with NON Sawstops?
And where did the smiley faces go???
Posts: 10,717
Threads: 1
Joined: Jan 2006
Location: Orlando, Florida
Sounds to me like what we call in my world a "sneak circuit". Something fails, and it provides a new path for the current with attendant unexpected results. I hope they contacted SawStop and that the root cause is identified and fixed. He's fortunate the blade only rotated a couple of times vs. starting up full speed.
Still Learning,
Allan Hill
Posts: 6,442
Threads: 0
Joined: Feb 2006
bizarre.
I always unplug my tablesaw whenever I go to change the blade!
Posts: 5,653
Threads: 0
Joined: May 2005
Location: Centre County Pennsylvania
I have no idea why anyone would post about this on a forum. Lock out/tag out, cut the power cord, nobody touches the saw until sawstop says what to do. Ok, post on the forum after you do all that.
Posts: 4,895
Threads: 0
Joined: May 2010
(08-08-2016, 11:08 PM)EricU Wrote: I have no idea why anyone would post about this on a forum. Lock out/tag out, cut the power cord, nobody touches the saw until sawstop says what to do. Ok, post on the forum after you do all that.
You post this as a PSA to alert others that there may be a problem and to be careful.
