#24
I sold a 2 inch thick 20by 16 walnut cutting board to a friend of mine. The buyers girlfriend washed it the other night and the boards fibers stood up after it got wet. What's a way to fix that.
Reply

#25
Not to be a smart azz, but don't wash it.  At least don't soak it in water or put it in the dishwasher.  Hand wash only.  At this point, it will need sanded/scraped to remove the raised grain.

Was there any oil or wax on the board?
If you are going down a river at 2 mph and your canoe loses a wheel, how much pancake mix would you need to shingle your roof?

Reply
#26
Sand it and then oil it real good with mineral oil.
Fill your heart with compassion, seek the jewel in every soul, share a word of kindness, and remember; the people's what it's about.
Capt. Tony Tarracino


Reply

#27
Razor blade on edge may work well.
Carolyn

Trip Blog for Twelve Countries:   [url=http://www.woodworkingtraveler.wordpress.com[/url]

"It's good to know, but it's better to understand."  Auze Jackson
Reply
#28
By now you know that you should do three-four defuzz cycles of wet/dry/sand repeat before presenting.  Gives you the best shot at keeping the board from getting standing grain.  Even if it does, what's the problem?  Wet scrub it a few times and it will go away.  Wet, because the fibers are softer when wet. 

Bit of detergent and water wipe/rinse is all a meat board needs to stay well.  The one for anything but meat needs nothing.
Better to follow the leader than the pack. Less to step in.
Reply
#29
Glenn,

You may try a combination of paraffin wax melted in MO for the finish. I put it in a mug on a coffee pot warmer. I like this much better than MO alone.


Reply
#30
did  it wh mineral oil twice I guess I need to sand wet it and sand some and then give a good mineral oil rub down
Reply
#31
You'll never be able to overcome the carelessness of people. In the future you may want to add a tag that explains proper care. Some people are oblivious to the idea that wood and water are not a good combination.

Ron
"which plane should I use for this task?......the sharp one"

http://www.breseplane.blogspot.com/
Reply

#32
(09-23-2016, 06:07 AM)Ron Brese Wrote: In the future you may want to add a tag that explains proper care.

Ron

This. When I made a bunch for gifts a few years back I made tags and included a bottle of mineral oil or small tub of oil/beeswax mix.
Reply
#33
Just curious why anyone thinks that washing a cutting board is a bad idea.  Obviously dishwashers and soaking it are bad, but washing? Mine get washed every time they're used.
Reply
Cutting boards


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.