#21
Bought some cedar to make deck furniture and would like to keep it looking original instead of weathering to gray. Deck is covered so it won't get a lot of sun or rain. I understand that cedar does not take well to some finishes, any suggestions?
Reply

#22
Cedar oil.  What kind of "cedar" may make conventional oil/latex house stains possible.  Aromatic cedar is oily, wants its own.
Better to follow the leader than the pack. Less to step in.
Reply

#23
Thanks I'll try it.
Reply
#24
I read, on some forum, of someone using Sherwin-Williams A100 ultra deep paint base, without any tint at all, for an outdoor finish and that it worked very well.  Supposedly paint without any color, but including UV protection.  I can't vouch for it myself...
              -Howard
Reply
#25
This cedar planter, is finished with Minwax Tung and teak oil.
Surface prep, was just off the thickness planer.
The oil needs to be reapplied every year to keep it looking fresh, and cedar like.

[Image: Tomato%20planter%204_zpsfbf4odsv.jpg]

This deck side table, was sanded to 180 grit, and then 320 in-between coats of tung & teak oil.

[Image: Deck%20side%20table%203_zpsvvt6gplz.jpg]

Have a good week.
Reply
#26
Never ending job keeping it red. It can be done with 2 to 3 x year applications, but it really goes to grey fast. Plenty on the web about how to do it, many are also trying to sell you their concoction. If you grow tired of trying to keep it Natural, Behr solid color stain will give you an easy 10 years of whatever color you decide on. We used it on our last homes exterior, WRC siding. We were there 22 years, and had put the 2nd application on 5 years before selling it, same coat is still going strong on it 8 years later. Guy across the street had used that Olympic stain, he had to re-coat every 3 years or it looked like a buffalo chip
Big Grin
Worst thing they can do is cook ya and eat ya

GW
Reply
#27
CWF ..garden sprayer .. coat every year . Will turn darker. When it goes bad ...TSP and bleach will bring it right back with a pressure washer. Let dry apply CWF... repeat. I saw a deck 17 years old never refinished .. just a coat of CWF every year . It was dark but looked real good.



If it can't kill you it probably ain't no good. Better living through chemicals.

 
Reply
#28
What is CWF ?
Wally
Reply

#29
Flood product ...Clear Wood Finish..
Not for everyone . Easy on , and Easy off .



If it can't kill you it probably ain't no good. Better living through chemicals.

 
Reply
#30
I applied three coats of oil based poly to a cedar board as a test.  The board practically glows.  I looks great. 

I would suggest a test using spar varnish.  Indeed a test before any selected finish.

The poly will prevent most splinters in my opinion.
No animals were injured or killed in the production of this post.
Reply
Finish for Cedar?


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.