Posts: 40,094
Threads: 0
Joined: Apr 2007
what do those 2 screws on the left hold together? Then since I can't tell what type machine from the pic any chance the bottom is open if you laid it on one side allowing you to reach up from the bottom?
an impact with the bit held at an angle might create enough drag on the backside of the allen heads to loosen up
Phydeaux said "Loving your enemy and doing good for those that hurt you does not preclude killing them if they make that necessary."
Phil Thien
women have trouble understanding Trump's MAGA theme because they had so little involvement in making America great the first time around.
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
MM bandsaw door? Mine is similar I think
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 879
Threads: 0
Joined: Jan 2002
Location: Robertsdale, Alabama
10-22-2016, 04:05 AM
(This post was last modified: 10-22-2016, 04:07 AM by Stytooner.)
Some locks have a key. Short of having a key, have you pushed and pulled on the knob while turning? Does the manual not mention it?
Lee
Posts: 5,119
Threads: 12
Joined: Apr 2009
Location: SoMar
Looks like a cylinder lock to me. High security stuff.
Someone does not want you in there for a reason.
Have you looked at the manual to see if you can figure out how it is put together on the inside? Maybe that would give you a clue about what's happening that allows it to just turn. Also you might look to see if taking out those screws above would actually release the door. If that would work you might get enough friction on the nuts on the inside if you pull the screws out as you're turning them. Lift the heads with a pair of side cutters as you turn them with the driver.
Can you get something thin in between the door and the frame to feel the locking mechanism? Maybe you can unlock it that way?
Have you tried just pulling on the door to see if it'll open? Maybe the lock isn't actually holding it and there's a bit of friction somewhere else keeping the door closed.
Posts: 13,412
Threads: 0
Joined: Jun 2004
Location: Texas
The door may just be stuck- pull hard on it.
If that fails, you might try and loosen the screws the best you can then wedge a knife blade under the screw head and apply outward pressure as you turn the screws fast using a drill with the torx type bit.
Posts: 1,684
Threads: 0
Joined: Jan 2007
Completely guess, but could it be a safety lock? Try pulling on it while turning to the right, it may need tension on the chrome knob to turn the latch inside.
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
Important questions not asked.
What is it on?
Do you own it?
If so provide a make, and model #, and people who understand how to use Google will provide a manual to you, and it will likely end your suspense
Worst thing they can do is cook ya and eat ya
GW
![[Image: door%20lock_zpstuklxiui.jpg]](http://s335.photobucket.com/user/jokerbird_photo/media/door%20lock_zpstuklxiui.jpg.html)
An
