dewalt dw735 planer table hardware

[deeno]

Question on the dewalt 735 planer folding tables installation.  I bought a used planer couple of weeks ago for $300.  I thought I did not do to bad since it came with the tables and the stand.   I was looking at how to install the tables but it looks like its missing a hanger bolt, picture below.  Can you folks help me out on how this thing installs.  Hoping this is a simple bolt that I can just get at a hardware store.  Many thanks!

Dennis


<img src="http://i116.photobucket.com/albums/o31/ddeen/Questiosn%20to%20ask/planer%20leaf_zpsbjfe62ti.jpg" border="0" alt=" photo planer leaf_zpsbjfe62ti.jpg"/>

[Joel H.]

It's not just a normal bolt, it's a spring-activated bolt that allows the table to slip over it and then extends out to hold the table in place. Probably have to order it from DeWalt (or get it from an authorized repair place). You can probably see the others in the same place on the base of the planer - if any are there. There are two for each table (four total).

Joel