Posts: 2,000
Threads: 1
Joined: Aug 2016
11-26-2016, 12:11 PM
(This post was last modified: 11-26-2016, 12:16 PM by Roly.)
I would think a plumber would be first. Installing plumbing can be costly and he could determine which location(s) would be best. If you know a good general contractor they could advise also but probably would consult their plumber. Roly
Let me add, if you are going to have a general contractor do the job, start with him. He will work with the plumber to determine what is best from everyone's viewpoint.
Posts: 1,630
Threads: 0
Joined: Oct 2016
Location: Green & Gold and Red & White country
11-26-2016, 12:28 PM
(This post was last modified: 11-26-2016, 12:28 PM by MikeBob.)
Most cases a second floor washing machine set up requires a floor drain also.
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. RMB
The SO asked me today, "what are you going to do to day"? I said "nothing". She said, "that's what you did yesterday"! Me, "Yes love, but I was not finished yet"!!!!!!!!
Posts: 38,525
Threads: 0
Joined: Feb 2002
Location: East Texas
Framing, drywall, electrical, plumbing, finish work, permits.... I'd find a general contractor, let them find the plumber, electrician etc and handle it all
Reality is that which, when you stop believing in it, doesn't go away. - Philip K. Dick
Mark
Posts: 5,653
Threads: 0
Joined: May 2005
Location: Centre County Pennsylvania
11-26-2016, 03:58 PM
(This post was last modified: 11-26-2016, 03:59 PM by EricU.)
(11-26-2016, 12:28 PM)MikeBob Wrote: Most cases a second floor washing machine set up requires a floor drain also.
my understanding is that it also requires an automatic valve to keep the trap full
I would call a plumber and ask them what to do
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
Handyman. One that can pretty much do everything. May want to consult with a plumber at the same calling
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 13,006
Threads: 0
Joined: Mar 2003
(11-26-2016, 01:25 PM)meackerman Wrote: Framing, drywall, electrical, plumbing, finish work, permits.... I'd find a general contractor, let them find the plumber, electrician etc and handle it all
...and coordinate the effort.
Al
I turn, therefore I am!
Posts: 1,630
Threads: 0
Joined: Oct 2016
Location: Green & Gold and Red & White country
(11-26-2016, 04:43 PM)Stwood_ Wrote: Handyman. One that can pretty much do everything. May want to consult with a plumber at the same calling
This aint no job for a handy man, you need a plumper and an electrician for sure. Permits depending on where you live.
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. RMB
The SO asked me today, "what are you going to do to day"? I said "nothing". She said, "that's what you did yesterday"! Me, "Yes love, but I was not finished yet"!!!!!!!!
Posts: 2,949
Threads: 0
Joined: Dec 2003
(11-26-2016, 11:59 AM)JSpill Wrote: I need to have a clothes washer/dryer combo installed on the second floor of my house. I don't know where it should go. Who should I call to tell me the best place were the unit should be? Should I call a general contractor? Would a plumber be the guy to talk to? There will be carpentry work involved. I just don't know where to begin. How would you go about finding out how this job should be done?
Do you have a neighbor or friend who has done some construction work? That is who I would talk to first. He might keep you from making a costly mistake.
If you have plumbing and electric near a closet, I would think that is the best place. Stackable units will fit in a smallish closet.
If you have a closet behind a bathroom vanity, the job might be trivial.
Economics is much harder when you use real money.
Posts: 1,084
Threads: 0
Joined: Mar 2006
If I couldn't install them myself I would look for a handyman service or a general contractor.
