Posts: 2,682
Threads: 0
Joined: Mar 2000
Location: Portsmouth, VA
From what I can see from a quick online search, they dont look to be too different from each other. I would tend to favor whichever one is in better condition. Tires can be had from many sources. Probably they both came with rubber tires which if you replace with the same should last many more years. But you will probably have to crown the tires unless the rim already has the crown built in (like the typical Delta 14).
I would probably avoid the urethane tires, they may not last long and you may have some slipping or tracking issues if they arent glued and crowned. HTH. Post some pics of both candidates for better answers.
Posts: 463
Threads: 0
Joined: Oct 2007
Thanks for the response. I do not have an account set up yet for posting pictures. Is photobucket still the best option? or is there a better choice?
Posts: 16,604
Threads: 0
Joined: Oct 2002
Location: Ra-cha-cha, NY
I've stopped using photobucket as it's just gotten too bloated. I stick with tinypic (and there are others like it), which doesn't require an account, nor any personal info, nor even an email address. And without an account, the risk of moving and losing it is essentially zero, since there's no album.
Tom
“This place smells like that odd combination of flop sweat, hopelessness, aaaand feet"
Posts: 9,538
Threads: 0
Joined: Jan 2005
Location: Orlando FL
As the models are very similar, the better one to keep depends a lot on condition. Although, I would suggest that the better one to keep might be both of them. I have a couple of smaller band saws and keep different blades on them. They don't take much space and it is handy to not have to mess with blade swaps for different things.
Posts: 1,407
Threads: 2
Joined: Jun 2003
12-14-2016, 01:47 PM
(This post was last modified: 12-14-2016, 01:48 PM by rwe2156.)
Neither one. IMO it won't even be worth $35 for a decent set of urethane tires.
You're headed or nothing but frustration. My advice is scrap them and look for a better saw.
Posts: 2,682
Threads: 0
Joined: Mar 2000
Location: Portsmouth, VA
(12-14-2016, 01:47 PM)rwe2156 Wrote: Neither one. IMO it won't even be worth $35 for a decent set of urethane tires.
You're headed or nothing but frustration. My advice is scrap them and look for a better saw.
Curious as to why the OP will have nothing but frustration and what you think a better saw would be in the 10-12" size?
These saws were built for Sears by King-Seely in the '50s. Here is a picture of a restored one over on vintagemachinery.org:
![[Image: 122-A.jpg]](http://vintagemachinery.org/photoindex/images/122-A.jpg)
Posts: 146
Threads: 0
Joined: Apr 2006
If you want to test the one with bad tires, read on. First thing , don't laugh at this. Make a new tire from ordinary masking tape. Ten layers is about right. It will last for a long time. Like I said , don't laugh till you have tried it, it works.
Posts: 2,682
Threads: 0
Joined: Mar 2000
Location: Portsmouth, VA
(12-14-2016, 08:22 PM)Mac1 Wrote: If you want to test the one with bad tires, read on. First thing , don't laugh at this. Make a new tire from ordinary masking tape. Ten layers is about right. It will last for a long time. Like I said , don't laugh till you have tried it, it works.
I've got an old Powermatic 30a Belt and Disk Sander. The drums for the belt sander are aluminum and over the years became dished and needed to be turned or replaced to recreate the crown. At the suggestion of someone on OWWM long ago, I used some masking tape and built up the drums so each had a crown again. Its been running like a charm ever since. Once the tape dries out, it will be rock hard. So I'm laughing with ya on this one.
Posts: 9,538
Threads: 0
Joined: Jan 2005
Location: Orlando FL
I've never heard of this masking tape tire trick, but you know I have to try it now. Which works better, the blue or white tape?
