Motor Shaft Extender

[Jason28]

I'm looking for an extender for a 5/8" motor shaft. I've gotten a 5/8" to 1/2" adapter, but I could also use a 5/8" to 5/8" extension. I've looked online, and I can find step-up and step-down adapters, but my google skills aren't helping me on this one.. Has anyone seen something like this?

[JIMB49]

Are you Trying To Go 5/8 Motor shaft To 5/8 threaded shaft ?

[Jason28]

Are you Trying To Go 5/8 Motor shaft To 5/8 threaded shaft ?

Not threaded, but a straight shaft. I'd like to get my wire wheel a bit farther from the motor body.

[JIMB49]

So You Are Looking For 5/8 shaft coupling

[Jason28]

So You Are Looking For 5/8 shaft coupling

Sorry, I was completely distracted when I replied. No, I'm not looking for a coupler. You were correct the first time - I'm looking for a 5/8" threaded shaft for my 5/8" motor shaft.

[texaswally]

You could get a coupler and a 5/8 bolt, cut the head off the bolt and put smooth part in the coupler, two nuts and washers to hold the wire wheel.

[JGrout]

something like this but threaded on the smooth shaft?

[JIMB49]

Jason i Went And Measured My Shaft Its 1/2 inch shaft
 but i do have a bushing for one of my wheels that had a 5/8 hole 
where i got the bushing i was almost positive the bushing came with it

[Jason28]

Yes, like that with a threaded shaft on it.

[JGrout]

you may have to some more digging but this one with a different bushing would work.





You might want to change out the set screws for allen screws to help it balance a bit better


Joe