Posts: 1,630
Threads: 0
Joined: Oct 2016
Location: Green & Gold and Red & White country
Thanks for the report, been waiting for one. I hate the help me threads, that dont report back on.
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. RMB
The SO asked me today, "what are you going to do to day"? I said "nothing". She said, "that's what you did yesterday"! Me, "Yes love, but I was not finished yet"!!!!!!!!
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
Shutting off power to the fuel solenoid shouldn't be a problem. It may run a few seconds before actually shutting off
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 31,158
Threads: 2
Joined: Mar 2003
Location: Athens, TN
OK, it starts. That's good. Does it produce acceptable power? 60 hz? and can you draw a good load?
Glad you are making progress.
Rocket Science is more fun when you actually have rockets.
"The Constitution is not an instrument for the government to restrain the people, it is an instrument for the people to restrain the government." -- Patrick Henry
Posts: 22,729
Threads: 0
Joined: Feb 2005
Location: Regina Saskatchewan Canada
Speed control of the engine for output frequency and voltage regulation of the alternater have been my concerns with eliminating the control board. I haven't been able to determine if anything besides the board controls those functions.
Blackhat
Bad experiences come from poor decisions. So do good stories.
Posts: 2,002
Threads: 1
Joined: Aug 2016
01-15-2017, 12:03 PM
(This post was last modified: 01-16-2017, 12:11 PM by Roly.)
I think I remember seeing a under and over frequency shutdown on the control board. The normal speed control and voltage control is internal in the generator. Speed control is actually on the motor driving the generator (governor) which controls the frequency. Also on the control board is low oil shut down and I think it had a high temperature shut down. Both of these could be wired in the system to stop the unit also. Roly
Posts: 36,623
Threads: 3
Joined: Nov 2004
Location: RTP, NC
(01-14-2017, 06:35 PM)Mr_Mike Wrote: OK, it starts. That's good. Does it produce acceptable power? 60 hz? and can you draw a good load?
Don't know yet. Going to pick up the parts to do the necessary rewiring this week and then test all that out.
Posts: 16,604
Threads: 0
Joined: Oct 2002
Location: Ra-cha-cha, NY
I would load it up with resistive loads first time out. Heavy as you can. Toasters, space heaters, electric water heater, anything that has resistive heaters and no electronics. Just to see what happens to frequency and voltage, with loads that don't care about frequency and voltage.
Tom
“This place smells like that odd combination of flop sweat, hopelessness, aaaand feet"
Posts: 2,742
Threads: 0
Joined: Jan 2010
IMO shutting of the fuel is the better way to stop. This way there is no fuel evaporating leaving varnish residue to gum thing up. It won't start quite as quick, but start more reliably.
My boss is a Jewish carpenter. Our DADDY owns the business.
Trying to understand some people is like trying to pick up the clean end of a turd.
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
(01-16-2017, 02:05 PM)Foggy Wrote: IMO shutting of the fuel is the better way to stop. This way there is no fuel evaporating leaving varnish residue to gum thing up. It won't start quite as quick, but start more reliably.
Yes if you are going to store it. That's how I do mine. Just shut off the tank valve.
But to just shut it off, the OP was looking for a way to shut it down.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
I jumpered that to the starter and switch was able to start the generator. The wiring I used was somewhat redneckey and not permanent. I will get a switch that can switch the power to both the starter and the fuel solenoid at the same time. However, is shutting off the fuel solenoid an ok way to stop the engine, or should I figure out the wiring to kill spark? This isn't a lawn tool that would get used much. It's a generator that would get exercised every month or so.
