Posts: 6,678
Threads: 1
Joined: Jan 2003
Location: Southern California
Scrape or chisel out? Cover up with a glaze? Cover with tinted shellac?
Thanks, Curt
-----------------
"Life can only be understood backwards; but it must be lived forwards."
-- Soren Kierkegaard
Posts: 4,133
Threads: 0
Joined: Oct 2009
Location: Lawrence, KS
(02-02-2017, 04:37 PM)Gibbcutter Wrote: Some glue impacted the degree of stain absorption. Sanding out is not an option.
Any tricks out there that could help?
Careful in-painting of color in the affected area after sealing things down with some blonde shellac. Then seal down the in-painting. Then move on with the rest of the finishing schedule.
Alternatively, seal everything down and then go with a darker color in a gel-stain formulation, leaving it to nearly dry on the affected area. That makes it darker and may mask the boo-boo. Seal again and continue with finishing schedule.
Don't sweat the petty things and don't pet the sweaty things. -- G. Carlin
