Posts: 1,150
Threads: 0
Joined: Nov 2006
Location: Texas - Gods Country
This totally sounds like something I would do... Incidentally, I looked in the manual; figured surely it would tell us the answer...
Nope:
10.1 Installing bits Insert bit (not provided) into chuck jaws with about 1” insertion. When using a small bit, do not insert it so far that the jaws touch the flutes of the bit. Make sure bit is centered in chuck before tightening chuck. The chuck is a keyless model; simply rotate it by hand to tighten the bit.
Posts: 29,152
Threads: 1
Joined: Aug 2002
05-15-2017, 07:03 PM
(This post was last modified: 05-15-2017, 07:04 PM by JGrout.)
clockwise is tighten counterclockwise is loosen on every keyless chuck I have . in your case it should be the same if you view the direction from the power ( the top of the DP)
That is what I am going to say is correct.
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
Posts: 353
Threads: 0
Joined: Jan 2004
That is how my PM 2800 tightens( right) and loosens (left)
Posts: 837
Threads: 1
Joined: Sep 2007
Location: Suburb of Los Angeles
And that's what worked late last night.
Thanks.
