Posts: 29,152
Threads: 1
Joined: Aug 2002
if you are really concerned cut the middle bulls eye out and glue it back together.
Meh I rarely have issues with such lumber
Joe
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
Posts: 7,581
Threads: 0
Joined: Jan 2005
Location: New Zealand
If the board has dried reasonably flat and straight, then it should stay that way in service as well. If it's cupped and warped as it dried, then you might expect it to move more.
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
Most often I have seen after dimensioning wood down to close is where you will see if it's going to crawl around on ya. I've seen it overnight more than 3 weeks later. If it's good for a few days, I usually go with it. I seldom see movement if it doesn't when going to close. IOW not so much from close dimensioned to final, but mostly from rough rough, down to close. IE: 1' longer, x 1" wider kinda stuff.
Worst thing they can do is cook ya and eat ya
GW
Posts: 589
Threads: 0
Joined: Jan 2017
Location: Marina del Rey
Why intentionally use inferior wood here? Set it aside for less demanding or critical applications
Wood is good.
