I purchased this new about 10 years ago. Yesterday I noticed that the thing would not shut off. I was running around 100PSI and the tank would not fill to a higher pressure. I think It's rated for 150PSI. When I shut it off I could feel a lot of air escaping from the regulator. I think my regulator may be bad and allowing excessive leaking. I can get a part for around $50 but then I still have a 10year old compressor (new replacement form PC is around $100).
I this may be a common problem so I'm thinking about an upgrade.
I've been looking at the Senco PC0968. I'm just a hobbiest and I need to run some nail guns. No framers or roofers.
Has anyone got experience with the Senco PC0968? I've seen a lot of contractors use Senco and for that reason I. think they are a good unit.
Thanks
Mark
I this may be a common problem so I'm thinking about an upgrade.
I've been looking at the Senco PC0968. I'm just a hobbiest and I need to run some nail guns. No framers or roofers.
Has anyone got experience with the Senco PC0968? I've seen a lot of contractors use Senco and for that reason I. think they are a good unit.
Thanks
Mark