Woodnet Forums › › Active › Finishing v
Turbinaire Spray system

▼
Herb Offline
Member
Posts: 573
Threads: 0
Joined: Jul 2003
#22
06-21-2017, 10:29 AM
About a month ago I posted here about needing a part for my cup and was able, thanks to you all, to locate the part.  I have noticed that the lining in side the cup is pealing off and being sprayed out. I have not been able to find any liners for the cup except at Harbor Freight.  Does anyone know where else I might get some?  Another question, can you buy just the cup to fit the gun part and where might I get the cup?

Thank you for you help,
Herb
I'm supposed to respect my elders, but it's getting harder and harder for me to find one now.
Find
Reply
▼
Rob Young Offline
Helper Monkey
Posts: 4,133
Threads: 0
Joined: Oct 2009
Location: Lawrence, KS
#23
06-21-2017, 01:13 PM
(06-21-2017, 10:29 AM)Herb Wrote: About a month ago I posted here about needing a part for my cup and was able, thanks to you all, to locate the part.  I have noticed that the lining in side the cup is pealing off and being sprayed out. I have not been able to find any liners for the cup except at Harbor Freight.  Does anyone know where else I might get some?  Another question, can you buy just the cup to fit the gun part and where might I get the cup?

Thank you for you help,

Have you tried doing anything to accelerate the removal of the lining?  Then just use the cup without the lining.  


Consider moving to the 3M system with its bladders?
Don't sweat the petty things and don't pet the sweaty things. -- G. Carlin
Find
Reply
Herb Offline
Member
Posts: 573
Threads: 0
Joined: Jul 2003
#24
06-21-2017, 04:23 PM
To answer you question, no I have not tried anything to remove the coating.  It has  been suggested to fill it full of lacquer thinner and let it sit a few days.  Is there something else that is better and faster I can use.  I am not aware of 3M's bladders.  Are they easy to locate.

Thank you for your reply,
Herb
I'm supposed to respect my elders, but it's getting harder and harder for me to find one now.
Find
Reply
Rob Young Offline
Helper Monkey
Posts: 4,133
Threads: 0
Joined: Oct 2009
Location: Lawrence, KS
#25
06-21-2017, 11:16 PM
(06-21-2017, 04:23 PM)Herb Wrote: To answer you question, no I have not tried anything to remove the coating.  It has  been suggested to fill it full of lacquer thinner and let it sit a few days.  Is there something else that is better and faster I can use.  I am not aware of 3M's bladders.  Are they easy to locate.

Thank you for your reply,

3M, yes. Check with Jeff Jewitt at Homestead.
Don't sweat the petty things and don't pet the sweaty things. -- G. Carlin
Find
Reply
Herb Offline
Member
Posts: 573
Threads: 0
Joined: Jul 2003
#26
06-22-2017, 06:49 AM
I did call and got a his voice message to refer to his ebay site.
Herb
I'm supposed to respect my elders, but it's getting harder and harder for me to find one now.
Find
Reply
fredhargis Offline
Member
Posts: 12,610
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
#27
06-22-2017, 07:24 AM
It's called the PPS system, here's a link to the 3M info.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Find
Reply
sroxberg Offline
Member
Posts: 2,565
Threads: 0
Joined: Mar 2001
#28
06-22-2017, 08:49 AM
I 2nd the 3m system, best upgrade I ever made to my spray equipment. Makes life very easy and clean up a breeze.

I also like the fact that I can move the gun and spray in a 360 degree motion and it always has paint/dye/solution available to the gun.
Find
Reply
Rob Young Offline
Helper Monkey
Posts: 4,133
Threads: 0
Joined: Oct 2009
Location: Lawrence, KS
#29
06-22-2017, 09:40 AM
(06-22-2017, 06:49 AM)Herb Wrote: I did call and got a his voice message to refer to his ebay site.

Yes, 3M PPS.  Couldn't remember the name and didn't feel like Googling...

As I understand things (and this is on my to-do list of upgrades) you pick out the right adapter gizmo for the thread type and lengths on the gun from 3M then add the cup (big or small) some liners and the lid and you are off to the races.

Jeff may be off on vacation or something.  I think he's a one-man shop.

A few people around here use the 3M and I've gotten to play with it once but just haven't converted my gun yet.  It is one of the tools I have on my "can justify" list for when I finally get around to the kitchen makeover.
Don't sweat the petty things and don't pet the sweaty things. -- G. Carlin
Find
Reply
Herb Offline
Member
Posts: 573
Threads: 0
Joined: Jul 2003
#30
06-22-2017, 07:14 PM
Okay, I am going to ask a stupid question.  I do very little spraying, so I am not to sure of what you are referring to on PPS.  Is this only for a gravity gun or do they make it for a siphon feed gun.  I clicked the link called the number and was told the PPS is only for gravity feed.  If that is the case, I would need to buy a gravity feed gun. Is this correct?

Thank you,

Herb
Herb
I'm supposed to respect my elders, but it's getting harder and harder for me to find one now.
Find
Reply
Dave Diaman Offline
Honored Veteran
Posts: 3,217
Threads: 0
Joined: Jan 2006
#31
06-23-2017, 01:39 PM
No. I have the PPS systems on all my guns and I have a lot. Some of the best money I have ever spent on finishing equipment.

http://homesteadfinishingproducts.com/pr...iphon-pps/
Website Find
Reply
Thread Modes
Turbinaire Spray system


Forum Jump:


Users browsing this thread: 6 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.