▼
Posts: 4,814
Threads: 1
Joined: Jan 2004
Location: Eugene, OR
Hi all.
I removed the table (trunnions attached) from my MM-16 before a move. I'm struggling to bolt it on without any help. Just me. It's a bear to maneuver into place, especially since you have to lift it a little once it straddles the saw. Any suggestions or voices of experience?
Thanks!
Aram
Best,
Aram, always learning
"Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.” Antoine de Saint-Exupery
Web: My woodworking photo site
▼
Posts: 18,494
Threads: 0
Joined: Jul 2006
Location: Milwaukee area
If you are in se Wisconsin I'd come and help.
Otherwise would it be possible to prop it up with strategically placed saw horses and supports spanning them?
"Links to news stories don’t cut it." MsNomer 3/2/24
Posts: 4,814
Threads: 1
Joined: Jan 2004
Location: Eugene, OR
(08-14-2017, 08:36 PM)Phil Thien Wrote: If you are in se Wisconsin I'd come and help.
Otherwise would it be possible to prop it up with strategically placed saw horses and supports spanning them? Heh, my daughter goes to college in Madison, but I'm in the PNW. Thanks though!
Yeah, might have to. And use wedges to lever it up and down bit by bit. Kind of a PITA though, so I'll wait in case someone has a genius idea.
Best,
Aram, always learning
"Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.” Antoine de Saint-Exupery
Web: My woodworking photo site
Posts: 40,086
Threads: 0
Joined: Apr 2007
rig some type of hanging support to reduce chances of something dropping. Clamps and something to hang from. could that little bit of lift come from shims?
Phydeaux said "Loving your enemy and doing good for those that hurt you does not preclude killing them if they make that necessary."
Phil Thien
women have trouble understanding Trump's MAGA theme because they had so little involvement in making America great the first time around.
Posts: 4,814
Threads: 1
Joined: Jan 2004
Location: Eugene, OR
(08-14-2017, 10:21 PM)Bob10 Wrote: rig some type of hanging support to reduce chances of something dropping. Clamps and something to hang from. could that little bit of lift come from shims?
Good idea. Maybe compression straps around the top of the saw and under the table, would probably be cheap insurance. As for shims, I considered it but I don't see an easy way. They could get jammed underneath, then I have to reverse the whole thing and off I go again!
Best,
Aram, always learning
"Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.” Antoine de Saint-Exupery
Web: My woodworking photo site
Posts: 29,152
Threads: 1
Joined: Aug 2002
know anyone who has a glass suction cup? or even stone counter top cups
that would make it hang then it is easy to mount
Joe
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
Posts: 4,814
Threads: 1
Joined: Jan 2004
Location: Eugene, OR
(08-14-2017, 11:32 PM)JGrout Wrote: know anyone who has a glass suction cup? or even stone counter top cups
that would make it hang then it is easy to mount
Joe
Hanging it from the top would give me a heart attack!
 But probably a good idea. I didn't know those existed. Probably a long shot finding some, but worth asking around, thanks.
Best,
Aram, always learning
"Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.” Antoine de Saint-Exupery
Web: My woodworking photo site
Posts: 16,607
Threads: 2
Joined: Oct 1999
Never done it before on a bandsaw table, but an engine hoist with nylon straps seems like it would do the job nicely. I bought one from Pep Boys years ago (the red one) and have used it in the shop many times. Folds up for easy storage when not in use. Harbor Freight might also sell one.
Doug
Posts: 29,152
Threads: 1
Joined: Aug 2002
(08-14-2017, 11:51 PM)Tapper Wrote: Never done it before on a bandsaw table, but an engine hoist with nylon straps seems like it would do the job nicely. I bought one from Pep Boys years ago (the red one) and have used it in the shop many times. Folds up for easy storage when not in use. Harbor Freight might also sell one.
Doug
I wonder how well that works around the upper wheel housing.
not very is my conclusion
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
Posts: 1,998
Threads: 1
Joined: Aug 2016
Is there a I beam above somewhere you could rig off of or even large C clamps off of rafters if large enough for weight along with temporary braces if necessary. Use a hoist or a set of blocks to lift it with. Wouldn't think it was too heavy to do this way. Roly
|
