Posts: 12,606
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
No idea how to troubleshoot. This isn't what your specially after, but the speed control module is part # 76348.8109 on my parts drawing. Freud parts are available through Bosch, apparently that was part of the agreement when Bosch bought the bits/blades business. The number is 630-705-7810. I've used to get a few other things for mine.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 5,653
Threads: 0
Joined: May 2005
Location: Centre County Pennsylvania
speed controls usually have a capacitor in the speed regulation circuit. Capacitors have a sell-by date nowadays, unfortunately. Ok, they always did, but it has gotten a lot shorter. Usually, the speed regulation circuit is potted so it can't be repaired.
Posts: 233
Threads: 0
Joined: Sep 2011
Mr. Pirate, I have a freud ft2000e (i think those numbers are correct) and lost the speed control in it many years ago. I now use it successfully with the plug in style router speed control like MLCS sells ,and probably many others, and it works fine with that.
I believe I have had two of these routers and they both had the speed control fail.
Good luck
Gordon
Thanks for the replies. I will be taking it apart and bypassing the control.
Posts: 1,687
Threads: 0
Joined: Apr 2005
(08-17-2017, 06:37 AM)Pirate3 Wrote: Thanks for the replies. I will be taking it apart and bypassing the control.
I have a P-C 8529 that lost its speed control. It was pretty simple to remove the speed control module and wire the power straight through. I haven't used that router much since I performed the "surgery" but I know it runs and has acceptable power.
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
(08-16-2017, 08:16 PM)gordon 131 Wrote: I now use it successfully with the plug in style router speed control like MLCS sells ,and probably many others, and it works fine with that.
Gordon, are you talking about a speed controller like shown at the top of
this page?
I have a speed controlled "other" router that gave up the speed a while back. I think I also have one of those turn the knob gizmo's. Just never thought to try it on anything except a single speed router. What do they say, wake up every morning, and you are bound to learn something new.
Worst thing they can do is cook ya and eat ya
GW
Posts: 5,653
Threads: 0
Joined: May 2005
Location: Centre County Pennsylvania
08-20-2017, 03:10 PM
(This post was last modified: 08-21-2017, 11:30 AM by EricU.)
until they build a router with a brushless motor, which might happen, that kind of speed control will work with just about any handheld router.
There are definitely brushless spindles that are a lot like routers, but I just don't know of any handheld routers that are brushless.
on edit: a brushless router speed control wouldn't have to estimate speed, the control is driving the motor at a speed, and it isn't going to vary. This might well eliminate the problematic parts in a brushed/universal router speed control.
