Posts: 6,755
Threads: 0
Joined: Aug 2001
Location: Post Falls, ID
I get quite a bit of sunlight in the winter months with the sun so low on the horizon. I installed the cut to fit blinds from HD, and they work very well for a reasonable cost...
Two pennies worth...
Dave
"One should respect public opinion insofar as is necessary to avoid starvation and keep out of prison, but anything that goes beyond this is voluntary submission to an unnecessary tyrany, and is likely to interfere with happiness in all kinds of ways."
Posts: 925
Threads: 0
Joined: Jan 2013
Location: Columbia, SC
Old fashioned window shades work great in my shop. I have the opaque ones that don't allow any light through. They have a slick finish, so sawdust doesn't accumulate on them.
Posts: 612
Threads: 1
Joined: Dec 2016
I would think something like this wouldn't accumulate much dust and are easy to clean if they do.
https://www.selectblinds.com/rollershade...hades.html
Posts: 2,560
Threads: 0
Joined: Dec 2002
Location: Southwest, Iowa, USA
I have so much sawdust on my Shop windows you can hardly see out. Excessive sunshine coming in is not a problem.
Maybe I need to clean the windows - but I don't want people looking inside.
Know Guns. Know Security. Know Freedom - - - No Guns. No Security. No Freedom
Guns are supposed to be dangerous. If yours is not dangerous you need to take it to a gunsmith and have it repaired.
Posts: 12,610
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
11-02-2017, 06:34 AM
(This post was last modified: 11-02-2017, 06:34 AM by fredhargis.)
I would bet that plastic ones would be worse. They would have enough of a static charge to attract the dust, at least my PVC ductwork does. What about shutters on the outside?
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 6,423
Threads: 0
Joined: Feb 2002
Location: Truro,N.S. Canada
Use a plastic shower curtain.
Mel
ABC(Anything But Crapsman)club member
Posts: 5,421
Threads: 0
Joined: Jun 2001
Location: Troy IL
I use cheap off the shelf plastic blinds from HD they work great. If you like you can take them down and hose them off once in a while. I never have. they just work better .
don't put a lot of thought or money into it. it's a woodshop.
Life is what you make of it, change your thinking, change your life!
Don's woodshop
Posts: 18,631
Threads: 0
Joined: Jul 2006
Location: Milwaukee area
Posts: 887
Threads: 0
Joined: Sep 2009
Location: Carlisle, PA
(11-01-2017, 10:18 PM)Israel Wrote: My shop faces South and the sun, although I love the light, it can really heat the place up. I'd like to put up some curtains or shudders to keep some of the sunlight out, but I'm afraid they would be coated with sawdust in hours....just wondering if anyone has found something that doesn't accumulate sawdust quickly? Perhaps some sort of plastic rather than cloth material?? I could try rigging up something outside, but that will be harder....
Thanks!
Could you buy a painters canvas and turn it into curtains? I'm thinking utilizing the grommets that are already there ... just hem it to length.
