Posts: 864
Threads: 0
Joined: Nov 2008
Location: Pottsville, Pa.
I have two INCRA miter gauges but not an Osborne, so I guess I'm no help.
Fill your heart with compassion, seek the jewel in every soul, share a word of kindness, and remember; the people's what it's about.
Capt. Tony Tarracino
Posts: 2,384
Threads: 0
Joined: Jan 2008
Location: Irving, Tx
I have the Incra V27 and the Osborne. In my case, neither make a perfect cut at the angle indicated, but the Osborne is closer. At this point, I would not give up either one; both are great and probably get about the same amount of use.
Good luck.
"I tried being reasonable..........I didn't like it." Clint Eastwood
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
Osborne every time, Kreg any other time
Worst thing they can do is cook ya and eat ya
GW
Posts: 1,130
Threads: 0
Joined: Aug 2004
I saw that the Incra is made in the USA and Osborne is made overseas.
That is somewhat a negative.
Posts: 12,603
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
I think switching the Osborne from the right to the left slot is more work, but you can't loose with either.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 10,717
Threads: 1
Joined: Jan 2006
Location: Orlando, Florida
Incra. Presets allow dialing in any angle to the nearest 1/10th of a degree. Presets on the Osborne are only every 5 degrees. Fence on the Incra is more versatile, allowing stops and other things to attach to the fence.
Still Learning,
Allan Hill
Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
A gentleman here gave me the Osborne and I am very happy with it.
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 2,274
Threads: 90
Joined: Jun 2001
I like my Osbourne. You can fine tune it to cut perfectly; pretty easy to do. I check it just from time to time.
John
Always use the right tool for the job.
We need to clean house.
Posts: 5,661
Threads: 1
Joined: Mar 2008
Location: Flemington, New Jersey
11-21-2017, 09:02 PM
(This post was last modified: 11-21-2017, 09:06 PM by AgGEM.)
Have / had both.
My vote is Incra.
If for no other reason, the 1000 sweeps 180*.
For the same kinda money.
