Posts: 2,340
Threads: 0
Joined: Dec 2006
Location: virginia beach VA
Nice pile of shavings. What surprises me is how quickly a scraper will get too hot to hold if you are using your bare hands. I am sure yours got plenty hot as much as you did.
Posts: 11,420
Threads: 0
Joined: Dec 2002
...hangs his head in shame and vows once again to learn how to sharpen a scraper.....
MAKE: Void your warranty, violate a user agreement, fry a circuit, blow a fuse, poke an eye out...
www.makezine.com
No Good Deed Goes Unpunished
Posts: 2,581
Threads: 0
Joined: Apr 2012
Yup - it looks like that scraper was sharpened correctly.
Posts: 24,158
Threads: 2
Joined: Sep 2003
Location: Missouri
(11-18-2017, 10:26 PM)Woodcut Wrote: Am making 4 sets of shaker oval boxes out of maple, sizes 0 thru 4, and thought I would scrape the bands before shaping them into oval boxes. Much easier to get most of the finishing prep done while the stock is flat.
Anyway, I made a small pile of scraper shavings and thought I'd share.
![[Image: 4893.jpg]](https://s26.postimg.org/dn2o1dn7t/4893.jpg)
By my rough calculations, scraping both sides of the bands, it comes to about 23 square feet of scraping.
Time for some schnapps!
c
What brand of scraper are you running there. Homemade, production made?
Looks like it must have some V-8 power in it.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 10,118
Threads: 0
Joined: Sep 2006
Location: South Alabama
Beautiful! Isn’t a sharp scraper wonderful?
I remember getting my first card scrapers. Once I learned to use them, I was thinking, “Where have you been all my woodworking life?!?!?” Can’t imagine doing woodwork without them now.
Steve S.
------------------------------------------------------
Tradition cannot be inherited, and if you want it you must obtain it by great labour.
- T. S. Eliot
Tutorials and Build-Alongs at
The Literary Workshop
Posts: 24,158
Threads: 2
Joined: Sep 2003
Location: Missouri
Ok thanks
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 162
Threads: 0
Joined: Nov 2007
Those are picture perfect shavings. I have ten card scrapers, I'm lucky if 3 out of ten work that well.
Just curious though. What is the the board upon which the shavings sit? Almost appears to be a sheet of galvanized on top of some plywood. But my perceptions may be off, I'm on a second glass of fine Spanish red.
