Posts: 14,713
Threads: 1
Joined: Dec 2006
Location: Traverse City MI
12-05-2017, 01:33 PM
(This post was last modified: 12-05-2017, 01:35 PM by goaliedad.)
Rent a demo hammer? I did floor tile with an air chisel- it worked but was slow and the air moved the dust a log harbor freight demo hammer??
Posts: 2,198
Threads: 1
Joined: Sep 2003
Location: Maryland
I did a bathroom and powder room a few years back. I got the cheapo HF demo hammer (about $120-130?) and it made easy work of the tile and cement board. Just looked and the models appear to have changed. The one I have uses nonstandard bits, but haven't needed to replace any yet.
Posts: 7,421
Threads: 1
Joined: Sep 2005
I just went to the Harbor Freight site. They show this for $129.00:
https://www.harborfreight.com/power-tool...63441.html
It got good reviews.
What bits should I buy (this comes with no bits, but it is a standard SDS mount)?
I have both wall tile (about 4" square) and floor tile (mosaic) to remove. The wall tile is going to be replaced by wainscotting, so I am not too concerned about that, but the floor tile needs to be re-tiled so I want to get most of the mortar off. Do I use a wide bladed to get the mortar off? A narrow blade for the mosaic? I have not a clue.
No animals were injured or killed in the production of this post.
Posts: 36,538
Threads: 3
Joined: Nov 2004
Location: RTP, NC
I have that HF one. I have a pointed bit, a narrow chisel bit and a wide bit - they came in a set. So far I haven't needed anything else. The tile I demoed with it I used the wide blade for everything.
Posts: 2,198
Threads: 1
Joined: Sep 2003
Location: Maryland
The one I have came with both a wide (1 1/2 -2"?) and narrow (3/4 - 1"?) bit. I recall the small bit was fairly agressive, frequently digging into the plywood subfloor. I did use both....
There is a $15 combo bit that is likely durable enough on the same web page. Probably not good enough to bust up a driveway but for tilework it should be fine.
Posts: 1,622
Threads: 0
Joined: Mar 2008
12-05-2017, 05:27 PM
(This post was last modified: 12-06-2017, 02:34 AM by Lynden.)
How much use are you going to have for a demo hammer in the future? It's a single-purpose tool. A rotary hammer that can drill, chisel and scrape might be more useful around the house. This Bosch with a scaling chisel does a good job removing tile.
https://www.homedepot.com/p/Bosch-7-5-Am.../202080348 -- cheaper if you buy reconditioned
https://www.homedepot.com/p/Thinset-Remo...9302_slid_
Posts: 40,076
Threads: 0
Joined: Apr 2007
(12-05-2017, 01:04 PM)Cooler Wrote: I am in the process of remodeling the first of three bathrooms.
I have a good deal of tile to rip up both on the wall and on the floor. I was planning on getting a Makita demolition hammer (just over $400.00).
https://www.amazon.com/Makita-HM0870C-11...ion+hammer
I see I can get a pneumatic hammer chisel for about $40.00 (Dewalt):
https://www.amazon.com/DEWALT-DWMT70785-...tic+chisel
It requires 4.5 cfm compressor (more than my pancake compressor puts out). I could buy a larger compressor and the air chisel for less than the Makita.
Can someone offer some guidance?
I don't know where you live but if you live in a busy place CL can provide you what you need used and you might be able to get what you paid for it on CL when you are done
Phydeaux said "Loving your enemy and doing good for those that hurt you does not preclude killing them if they make that necessary."
Phil Thien
women have trouble understanding Trump's MAGA theme because they had so little involvement in making America great the first time around.
