Posts: 1,170
Threads: 0
Joined: Apr 2001
(01-03-2018, 09:26 PM)crokett™ Wrote: I think about a lot of stuff. This is one more thing I was thinking about that may never happen.... I have a John Deer AMT 600 (early Gator) this is the throttle control, sort of like a snow mobile, at least the ones I've ridden. Like snowmobiles it gets uncomfortable on longer rides, like to the farm. I'm wondering about converting it to a motorcycle twist grip. Is a twist grip all one piece? Looking at them online it appears they are. Will the diameter of the tube used on the handlebars be Could it be something as simple as install the twist grip and do what modifications are necessary to the cable to connect it to the twist grip?
there a number of options available to convert from thumb to twist, some of them don't even need to remove the thumb control, the twist interacts with them. I've also seen thumb extensions that look interesting.
Posts: 4,651
Threads: 0
Joined: Jan 2008
looks like with a little google search of
convert from thumb to twist grip throttle
theres some videos and a few write up in both atv and snowmobile forums.
looks like a new throttle cable might be necessary.
Posts: 36,546
Threads: 3
Joined: Nov 2004
Location: RTP, NC
I talked to a couple other people already and watched a couple videos last night. The basic premise seems possible. I'm going to stop by an ATV store and see if they have any assemblies I can look at. I'm hoping I can keep the existing cable, for obvious reasons.
Posts: 36,546
Threads: 3
Joined: Nov 2004
Location: RTP, NC
Yeah. I need to measure that. I think it's 7/8". I'm not buying anything my first trip anywhere anyway. I just want to look at the options for connecting the cable to the new grip.
Posts: 10,776
Threads: 0
Joined: Jul 2005
Location: Front seat on the Struggle Bus
You might want to check Dennis Kirk.....they might have something turn-key....
Ed
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
Just bolt on a straight lever, then turn a wood knob on your lathe.
Push to go..........pull to whooooooa
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 36,546
Threads: 3
Joined: Nov 2004
Location: RTP, NC
I did some more research and this is at least possible. I need to check what the linkage is at the engine. It will probably mean a new throttle cable along with the new grip. I think that's going to be easier than trying to adapt the existing cable to the new throttle.
Posts: 16,604
Threads: 0
Joined: Oct 2002
Location: Ra-cha-cha, NY
Do they still make single-cable twist grips? I remember the sticky scary minibike throttle I had that didn't always want to close, which I presume is why motorcycles went to two cables a very long time ago.
Tom
“This place smells like that odd combination of flop sweat, hopelessness, aaaand feet"
