Posts: 813
Threads: 0
Joined: May 2007
Location: Jackson, WY
I was going to say Mcfeelys but if that has failed you.
Consider torx screws. I have been using torx screws when I really mean it. Besides a better drive, they have a better design that has no threads near the head. It makes it easier to pull a joint tight. They also make torx in trim heads.
A carpenter's house is never done.
Posts: 675
Threads: 0
Joined: Aug 2011
01-24-2018, 03:00 PM
(This post was last modified: 01-24-2018, 03:14 PM by bhh.)
I've been buying from wwhardware.com Very nice screws. Good quantity discounts.
https://www.wwhardware.com/ultimate-squa...ws-8-scus8
My local cabinet supply house carries the Deerwood screws in their "jar program." IIRC, it's the same price for a number of sizes in 2# jars (about $10). They are slightly different in that they are "Quadrex" (Phillips + Square) that I tend not to like as much.
Torx are good (GRK and Spax) but seem to be more costly.
Posts: 805
Threads: 0
Joined: Feb 2003
Location: Land of Enchantment
I replenished my square drive supply with an order from McFeely's last June. I haven't noticed any decrease in the quality of the screws. I agree that their website is a mess to navigate. I also miss the $1 shipping from the old McFeely's. Shipping for smaller orders is very high, and free shipping doesn't start until $100 order. I waited until I could order a bunch of screw sizes and some General Finishes to get the order over $100.
Bob
Posts: 12,606
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
I've not noticed a drop in quality from McFeelys either, but agree with everything else being a lot less acceptable. But when I asked the same question about suppliers here a few years back, someone brought up
Quickscrews. Give them a looksee, the order I got seemed to be good quality, but one thing I didn't like was that many of their screws are (or were) self drilling and combo head.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 887
Threads: 0
Joined: Sep 2009
Location: Carlisle, PA
Try
CS_Hardware ... they sell screws by "each" and not pre-boxed and have a good selection of other things also.
Posts: 813
Threads: 0
Joined: May 2007
Location: Jackson, WY
I looked at McFeelys recently and the web site was awkward and most things were out of stock, no explanation for the different finishes.
I did the math on screws pricing and found they were around 6 cents per screw from McFeelys. My preferred alternative are Spax and at Home Depot they average around the same. It was just easier to buy a box of the sizes I needed to refill the sizes I need under 2 inches in #6 and #8. I don't use larger screws that much, but have a container of screws up to 4" that I just buy cheap Home Depot boxes to keep filled. I have recently started adding a variety of Torx to fill the needs for big holding power. I am two hours from a city and therefore a huge fan of mail ordering specialty items. I have yet find a compelling reason to not purchase my screws at Home Depot.
A carpenter's house is never done.
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
(01-24-2018, 02:11 PM)JDuke Wrote: I used to get assortments of square drive screws from mcfeeleys but haven't restocked in a couple years.
I really like square drive #8 and #10 screws but saw
Here a while back that mcfeeleys had changed owners and quality had suffered.
Just looked on their sight and it wasn't very easy to navigate.
Where is a good place to get screws in multiples of 100
Or I'd even be good getting 1000 of my more commonly used sizes.
Duke
Baer Supply. They handle the Wurth brand of screws.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
