02-01-2018, 07:29 PM
Yeah, I'm a noob. I have a belt/disc sander and have *never* used the disc. What grit should I purchase? I don't imagine I'll switch it out to change grits much, will I?
Semper fi,
Brad
Brad
▼ ▼ 
02-01-2018, 08:17 PM
(This post was last modified: 02-01-2018, 08:20 PM by SceneryMaker.)
What are you going to sand or grind with it? That will make a big difference. I have 80 grit on my 12" disk to sand segmented rings flat.
We do segmented turning, not because it is easy, but because it is hard.
02-02-2018, 01:00 AM
I kept an 80 on mine when I had one. Sold it several years ago (combo) when I purchased my 6x89
Steve
Mo. I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24 The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints WaterlooMark 02/9/2020 
02-02-2018, 11:08 AM
It'll be used for sanding rounds on wood and plywood. I'm thinking 80 grit will serve me well, but just wanted some input from others.
I currently use 80 grit on the belt part of the sander for sanding down miter splines and shaping.
Semper fi,
Brad 
02-02-2018, 07:59 PM
80 grit is pretty aggressive, I have it on my 12", next time, 100.
02-03-2018, 03:20 PM
(This post was last modified: 02-03-2018, 03:21 PM by BloomingtonMike.)
I use 80grit. Its not a final sanding or finish prep sanding device for me. Mostly shaping or removing unwanted material from parts. I use mine on wood, plastic, and metal. Mine is also variable speed which helps.
Glad its my shop I am responsible for - I only have to make me happy. |
|
General purpose 9" disc grit?
|
|
|
|
|
Users browsing this thread: 1 Guest(s)