Posts: 4,577
Threads: 0
Joined: Jan 2005
Location: North Front Range, CO
I cannot claim that I have used my ROS without a pad, but I can relate in that I am on my third replacement pad due to inattention when the sanding disk has completely worn through. I now use Mirka pad protectors as cheap insurance for poor attention spans.
Math is tough. Let's go shopping!
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
I had bad luck with H&L pads when they came out. I went back to all PSA pads which is all I use. After the first PSA pad on my festool 150/3 fell apart and they discontinued those pads, I made one from a PC pad, and all is well in the sanding world again.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 8,379
Threads: 1
Joined: Mar 2000
DAMHIKT
Posts: 5,653
Threads: 0
Joined: May 2005
Location: Centre County Pennsylvania
I'm pretty sure that I have only done that by throwing a sanding disk. My old Ryobi ROS, and the pads weren't particularly cheap as I remember.
Posts: 507
Threads: 0
Joined: Jul 2013
Oh yes I have!
Only took 5 minutes of sanding before I figured out what was wrong.
Posts: 1,616
Threads: 0
Joined: Feb 2010
Location: Coast of Maine
My thing is when doing a lot of sanding I connect a shop vac via hose to the ROS. Then forget to turn on the vac and wonder why there's dust all over hell's half acre.
g
I've only had one...in dog beers.
"You can see the stars and still not see the light"
The Eagles: Already Gone
Posts: 227
Threads: 0
Joined: Jan 2005
I thought I was the only one.......
Posts: 7,421
Threads: 1
Joined: Sep 2005
I did that once before I had my cataract surgeries and could not see very well. I was wondering why it was cutting so slowly...
No animals were injured or killed in the production of this post.
