Posts: 7,421
Threads: 1
Joined: Sep 2005
When I was a picture framer I made a 48” x 48” cabinet with about 44” x 36” drawers. It was a bit crude but it is still functional (I have it at home now) and about 20 years old. I can describe the construction to you if you are OK with “back room” equipment, and not furniture.
No animals were injured or killed in the production of this post.
Posts: 2,384
Threads: 0
Joined: Jan 2008
Location: Irving, Tx
A good friend has two and he actually keeps blueprints and drawings in them. If I had the space, I would have one.
"I tried being reasonable..........I didn't like it." Clint Eastwood
Posts: 147
Threads: 0
Joined: Jan 2017
They make great tool boxes. They of course come in various drawer depths, up to about 4" or so. I've had two of them in the tractor shed for at least 20 + years now.
Some times you can find them for next to nothing, at surplus and used office places.
Posts: 1,064
Threads: 0
Joined: Sep 2004
(03-26-2018, 02:41 PM)BloomingtonMike Wrote: Anyone have one of these in the shop and repurposed it for storage ideas? Drawers look pretty thin.
I use mine for storage of veneers. Works great!
Joseph Connors
The new Golden Rule .....
Those with the Gold make the rules!
Posts: 18,483
Threads: 0
Joined: Jul 2006
Location: Milwaukee area
I keep my collection of Beanie Babbies in one, very easy to keep them organized.
Posts: 1,622
Threads: 0
Joined: Mar 2008
03-26-2018, 11:16 PM
(This post was last modified: 03-26-2018, 11:25 PM by Lynden.)
I had six oak flat files in my office, stacked in pairs as shown in the picture below. Each pair was on a separate base and the lid was also separate. I moved the base to the top of each stack and hinged the lid at the back. I made one of the bases into a nice light table and the other two were used for storage. The three stacks were arranged as an island in the center of a large room. The island made a long layout table for looking at plans.
The way the drawers are constructed in oak flat files, they could be easily modified to make a few deeper drawers.
![[Image: blueprint-cabinet-canada-new-blueprint-f...t-file.png]](http://nola.space/wp-content/uploads/2018/03/blueprint-cabinet-canada-new-blueprint-file-cabinet-safco-blueprint-file-cabinet-blueprint-file.png)
Posts: 19
Threads: 0
Joined: Jul 2016
I put legs and casters on one section and a double thickness ply top: used for years as an outfeed table. Now serves as assembly table. Drawers used for bandsaw blades, and you guessed it--drawing storage!
Bob
Posts: 7,421
Threads: 1
Joined: Sep 2005
Put a glass top on a nice looking one and it would make a nifty coffee table.
No animals were injured or killed in the production of this post.
