04-03-2018, 12:23 PM
(This post was last modified: 04-03-2018, 02:40 PM by Mtobey.
Edit Reason: TIME FOR PRICING
)
First, I want to thank my pals here for having given me years of good cheer on this forum-specifically Hand Tools ( oddly enough, I tend to write that as one word but it always gets flagged). From time to time I marched upstairs to Power Tools and was well treated there as well. I do not have the photos you will all desire - you who may be interested may have to settle for email communication to get those. For years I have been at war with Photobucket.
PLEASE GIVE ME 2-3 DAYS TO RESEARCH PRICES BEFORE CALLING OE SENDING EMAILS. !!!
Next, I also apologize for pricing issues. I have not been around the market enough to set prices appropriate to genuine handtool users and buyers. I will do my best to set fair prices- I do not consider ebay a real guide-many morons shopping there. While I need the money, I still have a dedicated respect to premium and nice vintage tools. I am going to offer brief list (as is practicable) of what is for sale.
One of the reasons I had to move was what had been paid for as a dry basement for my shop turned into a progressively more wet and stubbornly humid Shop. I waxed my tools and also oiled them. Some of you old-timers will recall that the first "Niagra Falls" event was a total surprise- thus, many of my planes have soles that show the quilting pattern of the WD-40 treated movers' pad upon which they sat. Some even have reasonably small patches of remaining rust. I have not attempted removal in the interest of complete honesty. Several of my finest were renewed by "rarebear," aka Johnny Kleso. There is quite a mix, including some that have real sentimental importance to me because of how or from whom I acquired them. As example-- Alf helped me get a complete 045 Record Plow, complete with vintage box and complete irons. She got me a companion Rapier ( like M-F as related to Stanley) small plow with fragile box and all irons. And perhaps one of the most precious, an L-N 10 1/4 I got from Mike Wenzloff when he was collecting capital for his custom saw shop. I asked him to inlay his saw medallion into the cherry tote. Also, few of these planes have NOT been upgraded with modern steel and TYPES never meant much to me- I refuse to try to "type" them and I will not try to find original irons or cap irons. (most have Hock or L-N or more exotic irons and caps) I will be offering the $300+ set of Two Cherries Miniature chisels greatly expanded with Pfeils as well. Probably one of the most complete and useful (unused, mostly) sets of small chisels you will ever see-with tool roll. And, most all of the modern planes have their boxes( for you A-R types.)
HERE WE GO:
!. A correct #2 Stanley with original wood and beautiful replica quality coco wood installed. A previous owner did try to do fine flattening- I do NOT subscribe to the ultimate flatness school, and thus, left as it was- no fake parts! SW iron
2. Perhaps my favorite of the rarebears- a gorgeous 606 ( the "hell" with Patrick)-- Hock iron and cap
3. Another rarebear # 3 Bailey-Hock or L-N steel
4 Another rarebear # 604 - Hock or L-N steel
5. A pristine Millers Falls #3
6 A vintage Record 4 1/2 with Anderson HS Tool Steel iron. I redid the rosewood to factory condition. My best "smoother."
7.Very nice Stanley 287, but like most, the wrong fence -- a #78 fence and I will include a decent #78 for the humor of it.
8. The Record 045-complete with wooden box
9 The Rapier #3 Plough
10. The 044 Record complete with a bit tattered original box.
NOW, IF THOSE DON'T GET YOU SLOBBERING ALL OVER, HERE ARE MORE-MODERN HIGH QUALITY;
11. Veritas large Router Plane with extra irons
12, Medium Veritas Shoulder Plane
13 Veritas Scraper Plane-plain and toothed irons
14. SURPRISE- very nice vintage Stanley 12 1/2- all rosewood and metal intact and quite clean
15. L-N 10 1/4 from Wenzloff with his saw medallion beautifully inlaid low on tote ( this one hurts)
16. Special order L-N # 9 box miter- threaded on both sides for front knob, with "hotdog" and beautiful cocobolo
17. The PAIR- L-N Skew Block Planes -complete, only got to use as planned once or twice-Bronze , and, YOU GUESSED IT-- beautiful dark cocobolo knobs -r used twice one each edge of an ebony fretboard/ guitar "finger board"
19. TEASER- saws aplenty, L-N, Wenzloff, Spruce Mills ( Epoxied backs, pair joinery saws coco) , Can't recall expert maker of pair of joinery saw with slotted backs, cocobolo-never used, Wenzloff Short Back ( blade shape very similar to a #9 Disston) with Imbuia, used twice but you guys would never know, a new L-N 14 ppi Rip, nice but not mint Disston backsaw, vintage Harvey Peace backsaw
20. L-N # 66 Beading- haven't found the set of inserts yet--one 3/8 radius iS installed
I AM NOT SEEKING A BIDDING TYPE DEAL SNEAKING THROUGH MY EMAIL!!!! I WILL DO A "REASONABLE" NUMBER OF PHOTOS OF ALL OF IT. DO NOT,PLEASE, TRY BIDDING. I RESPECT THE FULES OF THIS GREAT FORUM ( WELL, MAYBE EXCEPT WHEN I CHALLENGED TODD TO A DUEL WITH .45 ACP 1911'S AT A DISTANCE WHICH REQUIRED A HELLUVA LOT MORE THAN ANGER--IT REQUIRED DEADLY CONFIDENCE AND SKILL---STILL FEEL LUCKY I DID NOT GET BOUNCED FOR THAT. I HAVE BEEN ASKED ABOUT IT ON SEVERAL OTHER FORUMS !!! THOSE WHO KNOW ME WELL, ACCEPT THAT I WOULD HAVE HONORED THE DEMAND AND IN THOSE DAYS COULD HAVE PAID FOR OUR FLIGHTS TO DOM REP----ONE ROUND TRIP, ONE " NO RETURN FLIGHT" RESERVATION .HELL, I've BEEN SHOT ONCE WITH A SHOTGUN-BURNS LIKE THE DEVIL BUT BEEN HURT LOTS WORSE IN A RACING CRASH !!! <> <>
You may ask questions by email but please don't use up bytes here !!! I insist on following forum rules but if you inundate my butt with silly stuff, we are done. e.g. I will not get out the .0001 resolution digital calipers or Starrett mics to measure mouths, or thicknesses, or any other silly questions. No one, anywhere has felt I did not deliver exactly what was described and I just don't, in my clearly senior years status, feel like dealing with distrustful morons ( see, mid-point of "Butch Cassidy and the Sundance Kid" as spoken by Struther Martin- and, his whole down the mountain and up scenes; they are a genuine life-lesson all of us should treasure ).
MY email: jetobey@msn.com and for grins and expecting an 85% adult population here, my phone is 563 210 3693***** BTW. I hate texting!!!
PLEASE GIVE ME 2-3 DAYS TO RESEARCH PRICES BEFORE CALLING OE SENDING EMAILS. !!!
Next, I also apologize for pricing issues. I have not been around the market enough to set prices appropriate to genuine handtool users and buyers. I will do my best to set fair prices- I do not consider ebay a real guide-many morons shopping there. While I need the money, I still have a dedicated respect to premium and nice vintage tools. I am going to offer brief list (as is practicable) of what is for sale.
One of the reasons I had to move was what had been paid for as a dry basement for my shop turned into a progressively more wet and stubbornly humid Shop. I waxed my tools and also oiled them. Some of you old-timers will recall that the first "Niagra Falls" event was a total surprise- thus, many of my planes have soles that show the quilting pattern of the WD-40 treated movers' pad upon which they sat. Some even have reasonably small patches of remaining rust. I have not attempted removal in the interest of complete honesty. Several of my finest were renewed by "rarebear," aka Johnny Kleso. There is quite a mix, including some that have real sentimental importance to me because of how or from whom I acquired them. As example-- Alf helped me get a complete 045 Record Plow, complete with vintage box and complete irons. She got me a companion Rapier ( like M-F as related to Stanley) small plow with fragile box and all irons. And perhaps one of the most precious, an L-N 10 1/4 I got from Mike Wenzloff when he was collecting capital for his custom saw shop. I asked him to inlay his saw medallion into the cherry tote. Also, few of these planes have NOT been upgraded with modern steel and TYPES never meant much to me- I refuse to try to "type" them and I will not try to find original irons or cap irons. (most have Hock or L-N or more exotic irons and caps) I will be offering the $300+ set of Two Cherries Miniature chisels greatly expanded with Pfeils as well. Probably one of the most complete and useful (unused, mostly) sets of small chisels you will ever see-with tool roll. And, most all of the modern planes have their boxes( for you A-R types.)
HERE WE GO:
!. A correct #2 Stanley with original wood and beautiful replica quality coco wood installed. A previous owner did try to do fine flattening- I do NOT subscribe to the ultimate flatness school, and thus, left as it was- no fake parts! SW iron
2. Perhaps my favorite of the rarebears- a gorgeous 606 ( the "hell" with Patrick)-- Hock iron and cap
3. Another rarebear # 3 Bailey-Hock or L-N steel
4 Another rarebear # 604 - Hock or L-N steel
5. A pristine Millers Falls #3
6 A vintage Record 4 1/2 with Anderson HS Tool Steel iron. I redid the rosewood to factory condition. My best "smoother."
7.Very nice Stanley 287, but like most, the wrong fence -- a #78 fence and I will include a decent #78 for the humor of it.
8. The Record 045-complete with wooden box
9 The Rapier #3 Plough
10. The 044 Record complete with a bit tattered original box.
NOW, IF THOSE DON'T GET YOU SLOBBERING ALL OVER, HERE ARE MORE-MODERN HIGH QUALITY;
11. Veritas large Router Plane with extra irons
12, Medium Veritas Shoulder Plane
13 Veritas Scraper Plane-plain and toothed irons
14. SURPRISE- very nice vintage Stanley 12 1/2- all rosewood and metal intact and quite clean
15. L-N 10 1/4 from Wenzloff with his saw medallion beautifully inlaid low on tote ( this one hurts)
16. Special order L-N # 9 box miter- threaded on both sides for front knob, with "hotdog" and beautiful cocobolo
17. The PAIR- L-N Skew Block Planes -complete, only got to use as planned once or twice-Bronze , and, YOU GUESSED IT-- beautiful dark cocobolo knobs -r used twice one each edge of an ebony fretboard/ guitar "finger board"
19. TEASER- saws aplenty, L-N, Wenzloff, Spruce Mills ( Epoxied backs, pair joinery saws coco) , Can't recall expert maker of pair of joinery saw with slotted backs, cocobolo-never used, Wenzloff Short Back ( blade shape very similar to a #9 Disston) with Imbuia, used twice but you guys would never know, a new L-N 14 ppi Rip, nice but not mint Disston backsaw, vintage Harvey Peace backsaw
20. L-N # 66 Beading- haven't found the set of inserts yet--one 3/8 radius iS installed
I AM NOT SEEKING A BIDDING TYPE DEAL SNEAKING THROUGH MY EMAIL!!!! I WILL DO A "REASONABLE" NUMBER OF PHOTOS OF ALL OF IT. DO NOT,PLEASE, TRY BIDDING. I RESPECT THE FULES OF THIS GREAT FORUM ( WELL, MAYBE EXCEPT WHEN I CHALLENGED TODD TO A DUEL WITH .45 ACP 1911'S AT A DISTANCE WHICH REQUIRED A HELLUVA LOT MORE THAN ANGER--IT REQUIRED DEADLY CONFIDENCE AND SKILL---STILL FEEL LUCKY I DID NOT GET BOUNCED FOR THAT. I HAVE BEEN ASKED ABOUT IT ON SEVERAL OTHER FORUMS !!! THOSE WHO KNOW ME WELL, ACCEPT THAT I WOULD HAVE HONORED THE DEMAND AND IN THOSE DAYS COULD HAVE PAID FOR OUR FLIGHTS TO DOM REP----ONE ROUND TRIP, ONE " NO RETURN FLIGHT" RESERVATION .HELL, I've BEEN SHOT ONCE WITH A SHOTGUN-BURNS LIKE THE DEVIL BUT BEEN HURT LOTS WORSE IN A RACING CRASH !!! <> <>
You may ask questions by email but please don't use up bytes here !!! I insist on following forum rules but if you inundate my butt with silly stuff, we are done. e.g. I will not get out the .0001 resolution digital calipers or Starrett mics to measure mouths, or thicknesses, or any other silly questions. No one, anywhere has felt I did not deliver exactly what was described and I just don't, in my clearly senior years status, feel like dealing with distrustful morons ( see, mid-point of "Butch Cassidy and the Sundance Kid" as spoken by Struther Martin- and, his whole down the mountain and up scenes; they are a genuine life-lesson all of us should treasure ).
MY email: jetobey@msn.com and for grins and expecting an 85% adult population here, my phone is 563 210 3693***** BTW. I hate texting!!!
