Posts: 5,653
Threads: 0
Joined: May 2005
Location: Centre County Pennsylvania
Posts: 40,204
Threads: 0
Joined: Apr 2007
(05-04-2018, 04:40 PM)KeithLDob Wrote: I have (had) a saw that the blade was moved by turning a handle on the right side. It is bluish gray. The blade runs down a slot in the top of the saw. The motor rides on two round rails under the table. We used it to cut counter tops at our shop. It was stolen and I need to find out what it is called, or who might have made it. Any info would be greatly appreciated.
Thx: Keith
upcut saw
?
![[Image: maxresdefault.jpg]](https://i.ytimg.com/vi/DQy0DX1rt7A/maxresdefault.jpg)
Phydeaux said "Loving your enemy and doing good for those that hurt you does not preclude killing them if they make that necessary."
Phil Thien
women have trouble understanding Trump's MAGA theme because they had so little involvement in making America great the first time around.
Posts: 2
Threads: 0
Joined: May 2018
Could have been for anything, its like a table miter saw
Posts: 40,204
Threads: 0
Joined: Apr 2007
Probably should ask at the OWWM
Phydeaux said "Loving your enemy and doing good for those that hurt you does not preclude killing them if they make that necessary."
Phil Thien
women have trouble understanding Trump's MAGA theme because they had so little involvement in making America great the first time around.
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
I know what you are talking about. It did straight cutoffs and also 45 degree cuts.
Place about an hour away used to have one. They sold seconds, rejects, laminate counter tops.
Sadly, that building and contents burnt down a number of years ago.
No idea what the brand name of the saw was.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
