Posts: 16,604
Threads: 0
Joined: Oct 2002
Location: Ra-cha-cha, NY
Not specifically, but any smoke detector has a limited lifespan, so tossing it when the 10 year battery runs out is not much different than hard-wired in that sense. Though I prefer (and have) hardwired detectors all over the house, in large part because of the interconnection resulting in one triggering all, especially in the bedrooms.
I think the rules require one in each bedroom, one in every hallway outside bedrooms, and at least one on each floor, including the basement, as applicable. Obviously there is overlap in those requirements, especially if you only have a ranch house.
And that reminds me - mine are due for replacement across the board. I hope hardwired is still available, as I put a lot of effort into running 14/3 NM to power all ten of them.
Tom
“This place smells like that odd combination of flop sweat, hopelessness, aaaand feet"
Posts: 7,421
Threads: 1
Joined: Sep 2005
I would make suggestions, but NFPA does so better with more authority:
https://www.nfpa.org/Public-Education/By...oke-alarms
No animals were injured or killed in the production of this post.
Posts: 5,653
Threads: 0
Joined: May 2005
Location: Centre County Pennsylvania
the NFPA link doesn't really talk about brands though.
I would like hardwired interconnects. I don't trust wireless for that, especially from a company that is as (occasionally) unreliable as Kidde. I think hardwired interconnects are only available if they are ac powered.
I spent a couple of hours looking at features on the Kidde web page. It wasn't easy to tell what I wanted. I guess I can live with the dreaded 9v battery backup if I have to, but I would be pretty unhappy about it.
Posts: 5,653
Threads: 0
Joined: May 2005
Location: Centre County Pennsylvania
find the video of the guy who burned his house down with 9v batteries he took out of his smoke alarms
I did it for you:
https://www.insideedition.com/investigat...-burn-down