▼
Posts: 4,434
Threads: 0
Joined: Oct 2008
Location: Central Indiana
I went through my shop yesterday and spotted a brand new in-the-box dust collector wrapped in fancy paper with a note that said "Happy Birthday", signed by my wife. I really married right.
Anyway, that's all that was in the box. No hose, wyes, fittings, gates, or the other stuff needed to make a collector useful. Where do you suggest I get these things?
We do segmented turning, not because it is easy, but because it is hard.
▼
Posts: 676
Threads: 2
Joined: Jan 2007
Amazon, like everything else.
Posts: 12,605
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
You'll need to decide what the overall plan is for the system. If the collector will support hard piping and you plan to use it, the next decision is whether it will be metal or PVC. Personally I would make that a cost/availability decision, and some of the thinking needs to include just what collector you have. If you need ductwork larger than 4", metal comes in all sizes and HVAC stuff from the box store works fairly well (except for the wyes, they usually don't have them). If you go PVC, stay with what's called "thinwall" (or DWV, or sewer pipe, or a dozen other names) and the lightest will be stamped "ATSM D2729" on the pipe. PVC limits your ducting to either 4" or 6", but you can usually get true wyes. The 6" can be very hard to find. For the blast gates I think the best option is to build them, but they can be had with a simple search on the net...if you have a Menards around they carry some of this stuff in the tool section. Don't expect anything to fit, flex hose almost never connects to anything easily, so you need to cobble together such stuff.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 925
Threads: 0
Joined: Jan 2013
Location: Columbia, SC
08-27-2018, 06:55 AM
(This post was last modified: 08-27-2018, 06:57 AM by Hank Knight.)
PVC S&D (Sewer and Drain) piping is probably the least expensive and most readily available. It's also easy to cut with woodworking tools. Go to your commercial plumbing supply house for it. They will have a large selection of sizes and fittings, and they will be a lot cheaper than buying it at the BORG where selection is limited and prices are high. I bought 6" and 4" flex hose from Lee Valley when they offered free shipping. Good quality and competitively priced when shipping was not an issue. As Fred suggested, I built my own blast gates.
Posts: 305
Threads: 0
Joined: Apr 2007
Location: Mn
(08-26-2018, 05:41 PM)SceneryMaker Wrote: I went through my shop yesterday and spotted a brand new in-the-box dust collector wrapped in fancy paper with a note that said "Happy Birthday", signed by my wife. I really married right.
Anyway, that's all that was in the box. No hose, wyes, fittings, gates, or the other stuff needed to make a collector useful. Where do you suggest I get these things? A dust collector can be useful with just one hose and moved from machine to machine. What type of collector did she get you? How big is your shop? How many machines/tools do you want to collect from?
Nice gloat on the wife. Any sisters?
John
▼
Posts: 4,434
Threads: 0
Joined: Oct 2008
Location: Central Indiana
(08-27-2018, 04:07 PM)jkjen89 Wrote: A dust collector can be useful with just one hose and moved from machine to machine. What type of collector did she get you? How big is your shop? How many machines/tools do you want to collect from?
Nice gloat on the wife. Any sisters?
John
I frequently use 2 or 3 machines as a set, e.g. table saw, jointer, and planer. Other times, it's just one where the table saw is just a flat spot to hold the lathe tools. I'm thinking of putting the necessary fittings on each machine permanently to make it easier to juggle the hose.
She got the 2 hp Harbor Freight one with advice from my son who already set his up.
The wood side of the shop is 25 x 50 with 12 machines that make a mess. All the machinery is on wheels so I can rearrange as needed. Work on a big theater set requires an entirely different arrangement from work on a segmented turning, for example.
No sisters, though. Sorry.
We do segmented turning, not because it is easy, but because it is hard.
▼
Posts: 1,407
Threads: 2
Joined: Jun 2003
08-28-2018, 10:34 AM
That blower will support a cyclone and ducting.......rolling stuff around gets old real fast.
Posts: 925
Threads: 0
Joined: Jan 2013
Location: Columbia, SC
Scenery Maker, I believe Lee Valley has a free shipping promotion going on at the moment. It would be a good time to order some flex hose and related fittings - unless, of course, you can get them locally.
Just sayin'...
Hank
▼
Posts: 16,604
Threads: 0
Joined: Oct 2002
Location: Ra-cha-cha, NY
(08-28-2018, 01:21 PM)Hank Knight Wrote: Scenery Maker, I believe Lee Valley has a free shipping promotion going on at the moment. It would be a good time to order some flex hose and related fittings - unless, of course, you can get them locally.
Just sayin'...
Hank
With smooth interior wall. The cheap stuff, with corrugated inside wall, presents a very high flow resistance for its size. Best if you can use 5", in fact, as that's what the opening into the blower is beyond the wye, and step it down if you have to at the tool. Especially if the run is long.
Tom
“This place smells like that odd combination of flop sweat, hopelessness, aaaand feet"
|
