10-18-2018, 01:38 PM
OHIO Tool Vise Screw
I found this screw at a Estate sale. This was used to make a leg vice.
I removed the wood, cleaned the screw, removed all rust.
This is 18 inch long , 1 1/4 in diameter , Acme thread , length 12"
Has all hardware for installation, with original wood handle( i believe it is hard Maple)
You can use this to make a vise in bench, end vise, front vise or leg vise.
Only $ 45 plus shipping ( it is 5 lbs.)
I found this screw at a Estate sale. This was used to make a leg vice.
I removed the wood, cleaned the screw, removed all rust.
This is 18 inch long , 1 1/4 in diameter , Acme thread , length 12"
Has all hardware for installation, with original wood handle( i believe it is hard Maple)
You can use this to make a vise in bench, end vise, front vise or leg vise.
Only $ 45 plus shipping ( it is 5 lbs.)